Audited Supplier
MBH-PEEKS-001
Included
1year
Peek
＜0.01%
0.4%~1.4%
81~130MPa
Nature Beige
Max 260mm Dia. Per Customized
Yes
High Performance
Yes
Medical / E/E / Semiconductor / Aerospace etc
MBH
as Per Customer's Request
as per customer's request
China
3926909090
Product Description
MBH PEEM 5mm 7mm 10mm small bar rod
| Material | Brand | Size (Rod) | Services | Application |
| PEEK Resin PEEK+GF PEEK +CF PEEK +CU PEEK +ESD PEEK +Cermamic | MBH | T4 /5/6/7/8/9/10/13/16/18/22/ 25/26/40/45/50/55/60/65/70/75 /80/85/90/100mm or customized width normally 630/610mm | sheet/rod extrusion and machining and plastic modified services | Oil/natural gas extraction, temporary plugging and fracturing ball, medical, pharmaceutical, and semi-conductor, Aerospace, Auto etc. |
PEEK (abbreviation for PolyEtherEtherKetone) is a high performance semi-crystalline, engineering thermoplastic.
PEEK PLASTIC APPLICATIONS
PEEK is used in some of the toughest plastic applications that require the tightest tolerances. These include medical device parts, medical implants, structural applications, ultra-high vacuum applications, valve seats, pump gears, high purity seals, electrical connectors, screws, impellers, wear blades, lab equipment, analytical equipment, columns, cable insulation, and more.
PEEK PERFORMANCE
Properties of PEEK plastic include high temperature performance, excellent wear properties, superior chemical resistance and outstanding toughness and strength. It also has excellent deformation under load characteristics, a high flexural modulus, and exhibits low smoke and toxic gas emissions when exposed to a flame.
MACHINING PEEK
In its solid state, PEEK is readily machinable by CNC milling machines and is commonly used to produce high-quality plastic parts that are thermostable and both electrically and thermally insulating. PEEK is often considered a superior high-end engineering plastic, in the same category as Delrin, PTFE or nylon.
PEEK PLASTIC APPLICATIONS
PEEK is used in some of the toughest plastic applications that require the tightest tolerances. These include medical device parts, medical implants, structural applications, ultra-high vacuum applications, valve seats, pump gears, high purity seals, electrical connectors, screws, impellers, wear blades, lab equipment, analytical equipment, columns, cable insulation, and more.
PEEK PERFORMANCE
Properties of PEEK plastic include high temperature performance, excellent wear properties, superior chemical resistance and outstanding toughness and strength. It also has excellent deformation under load characteristics, a high flexural modulus, and exhibits low smoke and toxic gas emissions when exposed to a flame.
MACHINING PEEK
In its solid state, PEEK is readily machinable by CNC milling machines and is commonly used to produce high-quality plastic parts that are thermostable and both electrically and thermally insulating. PEEK is often considered a superior high-end engineering plastic, in the same category as Delrin, PTFE or nylon.
Properties
- Very stable at high temperatures
- Replaces stainless steel dry running parts
- Excellent Chemical Resistance
- Good resistance to radiation (Gamma & X-Ray)
- Low flammability
- High mechanical strength
- Food compliant
| Exterior | light brown |
| Tensile Strength MPA≥ | 100 |
| Elongation at break % ≥ | 45 |
| M.T.ºC | 343 |
| Tg ºC | 143 |
