Audited Supplier
HDT Series
Iron
for Experiment, for Air Conditioner, for Manufacture, for Refrigerate
Axial Flow
Medium Pressure
RoHS, UR, ISO, CE, CCC
Red, White, Blue, etc.
300PA~3000PA
IP55/IP65
2000m³/H~60000m³/H
HNDING
Wooden Box and Steel Frame Packaging
Have many sizes,Can provide according to your need
Shandong, China
8414593000
Product Description
The cylinder cooling fan is an axial flow fan specially used for cooling the rotary kiln cylinder in cement plants. It consists of a trolley, a bracket, a fan, a direction adjustment device, an air duct, and a nozzle.
The cylinder cooling fan is mainly used in the cement industry to cool down the kiln body when burning cement clinker. It can also be used to cool other rotary kilns. This fan is a movable air-cooling device.
The cylinder cooling fan can be moved freely or placed on a paved track. It can be operated by adjusting the blowing angle. Usually, more than 10 units are needed to achieve a uniform and good cooling effect on the cylinder.
Before operation, check whether all connecting parts are tight and remove foreign matter in the flow channel. Turn the fan impeller, it should not
There is friction. The temperature of the blowing medium should not exceed 60°C, the dust content should not be greater than 150mg/m3, there should be no debris with a diameter of more than 1mm, and it should not be explosive or corrosive to facilitate the normal operation of the fan. If the product is found to be abnormal during use, it must be repaired immediately. In addition, dust, dirt, and other impurities inside the fan should be removed regularly.
| Air volume | 2000m³/h~60000m³/h |
| Full pressure | 300~3000Pa |
| model | HDT |
Contact UsCompany: Zibo Hengding Fan Co., Ltd.
Address: Industrial Park, Beijiao Town, Zhoucun District, Zibo City, Shandong Province, China.
Website: http://hengdingfan.en.made-in-china.com
Cellphone: 0086 198 6252 1678
