Audited Supplier
ET-CRGD10WD-F
Signal Repeater
Cable
Standard
With Lightning Protection
ISO
New
2-50watt
80-95dB
Yes
Outdoor
5dB
1.5us
1.5
3dB
110/220VAC
<-45dbc
etenda
Carton or Wooden Case
CE, ROHS
Shenzhen
8517611010
Product Description
High power Outdoor GSM Dcs 900MHz 1800MHz Signal Repeater
We can also make other dual band repeater as customer,feel free to contact us for your requirement!
Introduction
RF Repeater is designed to enhance cellular network coverage and fill blind spots. Main operation of the repeater
is to receive low-power signal from Base Station (BS) via radio frequency (RF) transmission by its donor antenna,
process, amplify and forward the signal to Mobile Station (MS) in target coverage area by its service antenna.
Features
1.Aluminum alloy enclosure for excellent heat dissipation,waterproof design for all-weather installation;
2.Metal cavity filter technology inside, which gives wider receiving and sending separation, better gain flatness, higher stability, and lower noise figure;
3.Modules structure,full-duplex & dual-port design, and built-in power supply,easy for maintenance and installation;
4.High linearity PA; high system gain;
5.Allowing for continuous gain adjustment 31dB by 1dB step;
6.ALC technology used to provide auto amplitude fixing;
7.Press-key , Local PC GUI operation and Optional Remote Modem control.
Specifications
We can also make other dual band repeater as customer,feel free to contact us for your requirement!
Introduction
RF Repeater is designed to enhance cellular network coverage and fill blind spots. Main operation of the repeater
is to receive low-power signal from Base Station (BS) via radio frequency (RF) transmission by its donor antenna,
process, amplify and forward the signal to Mobile Station (MS) in target coverage area by its service antenna.
Features
1.Aluminum alloy enclosure for excellent heat dissipation,waterproof design for all-weather installation;
2.Metal cavity filter technology inside, which gives wider receiving and sending separation, better gain flatness, higher stability, and lower noise figure;
3.Modules structure,full-duplex & dual-port design, and built-in power supply,easy for maintenance and installation;
4.High linearity PA; high system gain;
5.Allowing for continuous gain adjustment 31dB by 1dB step;
6.ALC technology used to provide auto amplitude fixing;
7.Press-key , Local PC GUI operation and Optional Remote Modem control.
Specifications
| Project | Uplink | Downlink | |
| Working Frequency | GSM900 | 880 ~ 915 MHz | 935 ~ 960 MHz |
| DCS | 1710 ~ 1785 MHz | 1805 ~ 1880 MHz | |
| Frequency Error | ≤±0.5ppm | ||
| Output Power | 33dBm | 40dBm | |
| Gain | 85dB | 90dB | |
| In-Band Ripple | GSM | ≤3dB | |
| DCS | ≤5dB | ||
| WCDMA | ≤5dB | ||
| VSWR | ≤1.5:1 | ||
| Three order intermodulation | ≤-45dBc/30KHz | ||
| Gain adjustment accuracy | 0-10dB≤1dB | ||
| 10-20dB≤1dB | |||
| 20-30dB≤1.5dB | |||
| System Delay | ≤1.5us | ||
| Rejection band | Fo±0.4MHz | ≤-25dBm | |
| Fo±0.6MHz | ≤-35dBm | ||
| Fo±1MHz | ≤-48dBm | ||
| Spurious Emission | 9KHz~150KHz≤-36dBm/10KHz | ||
| 150KHz~30MHz≤-36dBm/100KHz | |||
| 30MHz~1GHz≤-36dBm/100KHz | |||
| 1GHz-12.75GHz≤-30dBm/1MKHz | |||
| Noise Figure | ≤5dB | ||
| I/O Impedance | 50Ω | ||
| RF Connector | N-Type (Female) | ||
| Frequency error | ≤±5×10¯8 | ||
| Reliability | To the GB6993-86 standard | ||
| Electromagnetic compatibility | To the ETS200300 694-4 standrd | ||
| Power | AC110V or AC220V | ||
| Temperature Range | -25ºC~+65ºC | ||
| Relative humidity | ≤95% | ||
| Size | 540X360X230mm | ||
| Weight | 25kg | ||
| Operation Configuration | LCD Display, Manual Key-press, PC RS232 Port | ||
| GSM MODEM (Optional) | |||
| Ethernet RJ45 (Optional) | |||
