Audited Supplier
MK1060
Long Term
1
Centerless Grinding Machine
Cylindrical Parts
Grinding Wheel
CNC
Automatic
Plunge Cylindrical Grinder
High Precision
CE, ISO 9001
New
0.001mm
P500*200*305mm
60mm
PLC, CNC
PHISONG
Wooden Case
2050*1680*1380mm
China
8460291100
Product Description
MK1060 Single Servo PLC Centerless Grinder
Salient Feature:
1.The bearing of grinding wheel spindle is four plates dynamic tiltable ball bearing bush, with high precision.
2. The bearing of regulating wheel spindle adopts double support & four plates dynamic tiltable ball bearing bush, with high precision
3. The feeding system equipped servo motor with high precision planetary gear reducer, feeding through coupling driving ball-screw.
4. AC frequency converter is used for regulating wheel step-less speed control.
5. The grinding wheel dresser and regulating wheel dresser are driven by gear motor and ball screw, step-less speed control, and good performance of low speed moving.
6. The machine operated by 10' touch screen, auto plunge feeding, load, speed, time and steps can be adjusted.
7. Equipped Mitsubishi electrical system
Main Application:
The grinder is mainly used for through-feed grinding of cylindrical surface and ring-type parts, as well as for plunge-cut grinding of various stepped, cones that the conicity less than 1:20 .
2.Main configuration1.The bearing of grinding wheel spindle is four plates dynamic tiltable ball bearing bush, with high precision.
2. The bearing of regulating wheel spindle adopts double support & four plates dynamic tiltable ball bearing bush, with high precision
3. The feeding system equipped servo motor with high precision planetary gear reducer, feeding through coupling driving ball-screw.
4. AC frequency converter is used for regulating wheel step-less speed control.
5. The grinding wheel dresser and regulating wheel dresser are driven by gear motor and ball screw, step-less speed control, and good performance of low speed moving.
6. The machine operated by 10' touch screen, auto plunge feeding, load, speed, time and steps can be adjusted.
7. Equipped Mitsubishi electrical system
Main Application:
The grinder is mainly used for through-feed grinding of cylindrical surface and ring-type parts, as well as for plunge-cut grinding of various stepped, cones that the conicity less than 1:20 .
| Name | Specification | QTY | Unit | Supplier |
| Control System PLC | Q | 1 | set | Mitsubishi |
| Servo Motor | 1 | set | YASKAWA | |
| Screen | 1 | set | Kunlun Tongtai | |
| Ball Screw | 3 | sets | Nanjing Technical Equipment Manufacture Co., LTD | |
| Inverter of Regulating Wheel | 1.5KW | 1 | piece | Inovance |
| Converter AC Motor of Regulating Wheel | Y2 1.5KW | 1 | piece | Wannan |
| Motor of Grinding Wheel | Y2 15KW | 1 | piece | Wannan |
| Low Voltage Device | 1 | set | Chint |
3.Technical Data
| 1 Axes | ||
| Through grinding | Dia. | 5-60mm |
| Length | 195mm | |
| GW SPEC. (O.D.*width*I.D.) | 500*200*305mm | |
| RW SPEC.(O.D.*width*I.D.) | 350*200*203mm | |
| GW Speed | 1318r/min | |
| RW Speed (stepless) | 10-200r/min | |
| Swiveling Angle of RW | Vertical | -1°~ +5° |
| Horizontal | 0°~ +5° | |
| GW min feeding amount | 0.001mm | |
| GW dresser min feeding amount | 0.001mm | |
| Height from center line of GW & RW to work rest | 200mm | |
| Cooling water flow | 50L/min | |
| GW Motor | 15kw | |
| RW Motor | 1.5kw | |
| Power Supply | 3N 50HZ 380V | |
| Dimension(L*W*H) | 2050*1680*1380mm | |
| Machine Weight | About 3200kg | |
| Accuracy (fine grinding for standard bars D 15mm, L50mm) | Roundness | 0.001mm |
| Cylindricity | 0.002mm | |
| Roughness | Ra.0.16μm | |
