Audited Supplier
SYS-200
Circular
Test Sieve Analysis Equipment
Vibrating Screen
Experiments Shaker, Lightweight Fine Shaker, Particle Size Analysis
Vibration Motor
for Material Is Powder or Particle
Single
Circular Vibrating Screen
Stainless Steel Spring
1 Year
Customized
New
220V, 110V
Small
Upto 8 Layers
1400 R/M
0.12kw
Stainless Steel 304
Test Sieves for Sale
Hengyu
Wooden Case
360*300*736mm
Xinxiang, China
84741000
Product Description
Information for High Precisiona Test Sieve Shaker Lab Separation Concrete Test Sieve
Test sieves is recommended for general laboratory use and for the fine sieving of size particles.
Photo for main body and parts
Height and materials
Mesh size for choice as needed
Layer from 3-8 layers
Technical Parameters
How to operate for getting good analysis result?
Step 1: Weighing the tested material
Step 2: Place sieves with required mesh on the machine base sequentially
Step 3: Pour the tested material into the top of sieve
Step 4: The above step is OK, then cover with the lid and set the right time
Step 5: Power on
Step 6: It's time to set up, power off
Step 7: Remove the lid and sieves one by one from the top to bottom
Step 8: Summary: measure the weight of test material leaved on each sieve and bottom pan, and then gets their proportion and other related analysis result.
If you need one set of test sieve, please let's know the following requirements:
1. How many sieves you need at once
2. The mesh size of each sieves
3. Please suggest the voltage in your plant
Should you be interested in our machines, don't hesitate to contact now to get further communication.
Test sieves is recommended for general laboratory use and for the fine sieving of size particles.
| Features of test sieve: 1. Accurate mesh size guarantees precise analysis of sample 2. Application: evaluation of size analysis 3. Typically requires 50-150g of sample material 4. Setting time limits for 1 second -9999 seconds 5. Up to 9 fractions in one sieving operation 6. Approved ISO 9001:2008, CE and BV certificates 7. One person can pick up it | |
Photo for main body and parts
Height and materials
Mesh size for choice as needed
Layer from 3-8 layers
Technical Parameters
| No. | Item | Unit | Data | |
| 1 | Sieves | Layer | 1-8 layer as requested | |
| 2 | Diameter | mm | 200 | |
| 3 | Granularity | mm | 0.038-3 | |
| 4 | Noise | db | Less than 50 | |
| 5 | Feed capacity(once) | G | Less than 200g | |
| 6 | Vibration amplitude | mm | 5 | |
| 7 | Vibration motor | Voltage | V | 220-240 |
| Rotate speed | Rpm | 1400 | ||
| Power | KW | 0.12 | ||
| 8 | Overall dimension (length*width*height) | mm | 300*360*736 | |
| 9 | Net weight | kg | 37 | |
How to operate for getting good analysis result?
Step 1: Weighing the tested material
Step 2: Place sieves with required mesh on the machine base sequentially
Step 3: Pour the tested material into the top of sieve
Step 4: The above step is OK, then cover with the lid and set the right time
Step 5: Power on
Step 6: It's time to set up, power off
Step 7: Remove the lid and sieves one by one from the top to bottom
Step 8: Summary: measure the weight of test material leaved on each sieve and bottom pan, and then gets their proportion and other related analysis result.
If you need one set of test sieve, please let's know the following requirements:
1. How many sieves you need at once
2. The mesh size of each sieves
3. Please suggest the voltage in your plant
Should you be interested in our machines, don't hesitate to contact now to get further communication.
