High Pressure Fog Machine Fog System

Products Information
1. Flow rate ranging from 0.3l/min to 17l/min, working area from 10m2 to 1000m2.
2. Working under the pressure of 20-70KG(290PSI-1015PSI), the liquid flows in a high speed forming a centrifugal vortex In the vanes, then spray the fine droplets from the orifice.
3. The accomplied nozzle can be used in artificial fog, disinfection, cooling, humidifying etc. As the wide use in artificial fog industry, it's also called artificial fog nozzle, cooling fog nozzle.
4. Machine can be customized: with or without timer, plated cover or SS cover etc. 








Misting nozzle for the fog system:
Nozzle Specifications
Material : brass ,stainless steel , nickled brass
Inlet size: 1/8",3/16",10/24" ,12/24" and quick connect for low and high pressure

Feature:
1. Without air's supplementary, system device is simple.
2. Fog's droplets' diameter ranges from 3-70UM, and spray fully.
3. Energy and water saving, low cost and good effects.
4. Non-blocking and anti-drop.
5. Nozzle tip uses wear-resistant materials, and service life is 2.5 times of similar nozzle.

Application:
Disinfection spraying without wet
Textile workshop humidification
Stock farm cooling sterilize
Man-made fog sight
Vegetable retain freshness
Dust removing
poultry house