Audited Supplier
LXPU-H2
Polyurethane Foam Machine
Polyol* ISO
High-Pressure Air Type
Automatic
Computerized
CE, ISO9001:2008
50-5000g/S
Lingxin
Plywood Case
3800*1900*2300
Mainland China
8477409000
Product Description
COMPANY INTRODUCTION VIDEO LINKE: https://youtu.be/ZbQmDYK5p-E
Equipment Characteristic:
High Pressure Mixing Head:
The L type twice mixing head adopts high quality alloy and the most advanced heat treatment process in China.All cleaning can be finished by clean shafts without wasting materials.
High and Low Pressure Switching Valve:
The adoption of high pressure resistant 35Mpa stainless materials optimizes the valve structure and ensure the pressure resistance and anti-abrasive seal without leaking for long term usage.
Permanent Magnet Joint Shaft:
The permanent magnet joint shaft consists of outer rotor,inner rotor and isolation set,which solves the leaking issues in seal and troubles of changing the material pump seal frequently thoroughly.
High Pressure Plunger Pump:
Supplied in set by two famous PU special pumps manufacturers,one is Germany Rexroth, the other is China Gelanrex, Lingxin has built long term cooperation with them.
Human-computer interface:
The use of big touch screen makes the operation intuitive,be easily understood and avoid error efficiently.
Equipment Characteristic:
High Pressure Mixing Head:
The L type twice mixing head adopts high quality alloy and the most advanced heat treatment process in China.All cleaning can be finished by clean shafts without wasting materials.
High and Low Pressure Switching Valve:
The adoption of high pressure resistant 35Mpa stainless materials optimizes the valve structure and ensure the pressure resistance and anti-abrasive seal without leaking for long term usage.
Permanent Magnet Joint Shaft:
The permanent magnet joint shaft consists of outer rotor,inner rotor and isolation set,which solves the leaking issues in seal and troubles of changing the material pump seal frequently thoroughly.
High Pressure Plunger Pump:
Supplied in set by two famous PU special pumps manufacturers,one is Germany Rexroth, the other is China Gelanrex, Lingxin has built long term cooperation with them.
Human-computer interface:
The use of big touch screen makes the operation intuitive,be easily understood and avoid error efficiently.
Technical Parameters:
| Injection Output: | 50-5000g/s | Repeat injection accuracy: | ±1% |
| Material tank volume: | 250L-500L | Compressed air needed: | Dry,oil free P:0.7Mpa Q:600NL/min |
| Injection pressure: | 10-20Mpa(adjustable) | Temperature control system: | Heat: 2×9Kw |
| Mixing ratio range: | 1:5~5:1(adjustable) | Input power: | Three-phase five-wire 380V |
| Injection time: | 0.5~99.99S(correct to 0.01S) | Total power: | 39KW-123KW |
| Material temperature controlling error: | ±2ºC | Raw material viscosity(22ºC): | POLY ~2500MPas ISO ~1000MPas |
