Audited Supplier
LZZBJ4-35
Power, Electronic, Instrument
Single
Core-type Transformer
Dry-type Transformer
Separated Winding Transformer
ISO9001-2000, ISO9001, CCC
Single-phase Transformer, Rectifier Transformer, Combined Transformer, Power Transformer
Power Frequency
OD
Dahu
DAHU
OEM
Wenzhou
8547909000
Product Description
Dry type transformer are widely used in
Chemical, oil and gas industry
Environmentally sensitive areas (e.g. water protection areas)
Fire-risk areas (e.g. forests)
Inner-city substations
Indoor and underground substations
Renewable generation (e.g. off-shore wind turbines)
Product Overview:
LZZBJ4-35 type current transformer is suitable for rated frequency 50Hz, rated voltage 35kV power system outdoor device ZW7-40.5 type vacuum circuit breaker for electrical measurement and protection. The product has single-variable ratio, multi-variable ratio, multi-level (two, three and four levels) high dynamic thermal stability, high precision, large capacity, etc., and is divided into two types of epoxy resin casting semi-closed and fully closed structure.
The product is divided into epoxy resin casting semi-closed and fully closed structures.
Conditions of use:
Ambient temperature: -5ºC ~ 40ºC, altitude not exceeding 1000 meters, no serious dirt in the atmosphere area
The environment temperature
Technical parameters:
Power factor of load: COSφ=0.8 (lagging)
Rated insulation level: 40.5/95/185kV
Rated secondary current: 5A or 1A
.
Product features:
LZZBJ4-35 type current transformer is epoxy resin casting fully enclosed product, suitable for rated frequency 50Hz or 60Hz, rated voltage 35kV and the following system, for current measurement, current measurement and relay protection. This product conforms to IEC60044-1 and GB1208 "Current Transformer" standard.
.
Structural features:
This type of current transformer is a fully enclosed pillar structure, and is a special transformer for ZW7-40.5 switch.
Features.
A dry type transformer is a type of transformer which never uses any insulating liquid where its winding or core are immerged in liquid. Rather, the windings and core are kept within a sealed tank that is pressurized with air.
Types of Dry Type Transformers
The dry type transformer is of two types. They are
Cast Resin Dry Type Transformer (CRT)
Vacuum pressure Impregnated Transformer (VPI)
What are the main advantages of a dry type transformer?
Self-extinguishing, low fire hazard
a dry type transformer comes with an eco-friendly material on its insulation. So, it comfortably winds in a self-extinguishing manner, is flame retardant, and of course easy to maintain. With it, you won't have to invest in a fire extinguisher. Plus, even under the influence of arcing, it doesn't produce toxic gases.
Zero Oil Usage
as mentioned earlier, the dry transformer doesn't need any liquid to cool. It only requires air to remain cool. So, you won't have to incur extra expenses to get oil, or any other liquid, plus the maintenance costs attached to them. It's safe to say that this is an almost maintenance free transformer, so you can stay worry-free.
Eco-friendly and safe
since dry transformers don't use oil or liquids for that matter, you won't have to deal with oil leaks. Or any other form of environmental pollutants. Plus, they are self-extinguishing meaning they rarely explode. Also, the dry type transformers are widely known to withstand unexpected weather changes, making them suitable for heavily polluted and condensed environments.
Low cost installation and lower load losses
due to their low risk nature, there are barely any restrictions when installing the dry type transformers. You also won't have to deal with other environmental precautions such as groundwater protection. Also, these transformers can serve you for over 20 years, with low chances of failure.
Low Maintenance
we cannot insist on this enough. The dry type transformers are extremely low maintenance. Like you barely have to even maintain them. As long as they have air to cool, you won't have to deal with built-up dirt. Also, you will never have to deal with liquid testing. However, a routine expert inspection is recommended, and that shouldn't be too hard.
Sustainable
when you use a dry transformer, you are playing a key role in ensuring we save our earthly resources. With it comes low electricity usage, 90% recyclable materials, and a reliable service of 20+ years.
Chemical, oil and gas industry
Environmentally sensitive areas (e.g. water protection areas)
Fire-risk areas (e.g. forests)
Inner-city substations
Indoor and underground substations
Renewable generation (e.g. off-shore wind turbines)
Product Overview:LZZBJ4-35 type current transformer is suitable for rated frequency 50Hz, rated voltage 35kV power system outdoor device ZW7-40.5 type vacuum circuit breaker for electrical measurement and protection. The product has single-variable ratio, multi-variable ratio, multi-level (two, three and four levels) high dynamic thermal stability, high precision, large capacity, etc., and is divided into two types of epoxy resin casting semi-closed and fully closed structure.
The product is divided into epoxy resin casting semi-closed and fully closed structures.
Conditions of use:
Ambient temperature: -5ºC ~ 40ºC, altitude not exceeding 1000 meters, no serious dirt in the atmosphere area
The environment temperature
Technical parameters:
Power factor of load: COSφ=0.8 (lagging)
Rated insulation level: 40.5/95/185kV
Rated secondary current: 5A or 1A
.
Product features:
LZZBJ4-35 type current transformer is epoxy resin casting fully enclosed product, suitable for rated frequency 50Hz or 60Hz, rated voltage 35kV and the following system, for current measurement, current measurement and relay protection. This product conforms to IEC60044-1 and GB1208 "Current Transformer" standard.
.
Structural features:
This type of current transformer is a fully enclosed pillar structure, and is a special transformer for ZW7-40.5 switch.
Features.
A dry type transformer is a type of transformer which never uses any insulating liquid where its winding or core are immerged in liquid. Rather, the windings and core are kept within a sealed tank that is pressurized with air.
Types of Dry Type Transformers
The dry type transformer is of two types. They are
Cast Resin Dry Type Transformer (CRT)
Vacuum pressure Impregnated Transformer (VPI)
What are the main advantages of a dry type transformer?
Self-extinguishing, low fire hazard
a dry type transformer comes with an eco-friendly material on its insulation. So, it comfortably winds in a self-extinguishing manner, is flame retardant, and of course easy to maintain. With it, you won't have to invest in a fire extinguisher. Plus, even under the influence of arcing, it doesn't produce toxic gases.
Zero Oil Usage
as mentioned earlier, the dry transformer doesn't need any liquid to cool. It only requires air to remain cool. So, you won't have to incur extra expenses to get oil, or any other liquid, plus the maintenance costs attached to them. It's safe to say that this is an almost maintenance free transformer, so you can stay worry-free.
Eco-friendly and safe
since dry transformers don't use oil or liquids for that matter, you won't have to deal with oil leaks. Or any other form of environmental pollutants. Plus, they are self-extinguishing meaning they rarely explode. Also, the dry type transformers are widely known to withstand unexpected weather changes, making them suitable for heavily polluted and condensed environments.
Low cost installation and lower load losses
due to their low risk nature, there are barely any restrictions when installing the dry type transformers. You also won't have to deal with other environmental precautions such as groundwater protection. Also, these transformers can serve you for over 20 years, with low chances of failure.
Low Maintenance
we cannot insist on this enough. The dry type transformers are extremely low maintenance. Like you barely have to even maintain them. As long as they have air to cool, you won't have to deal with built-up dirt. Also, you will never have to deal with liquid testing. However, a routine expert inspection is recommended, and that shouldn't be too hard.
Sustainable
when you use a dry transformer, you are playing a key role in ensuring we save our earthly resources. With it comes low electricity usage, 90% recyclable materials, and a reliable service of 20+ years.
| (A) | (A) | (VA) | (Ith)(kA) | (Idyn)(kA) | |
|---|---|---|---|---|---|
| 30 | 2 | 5 | |||
| 40 | 3 | 7.5 | |||
| 50 | 4.5 | 11.5 | |||
| 75 | 6 | 15 | |||
| 100 | 9 | 22.5 | |||
| 150 | 12 | 30 | |||
| 200 | 18 | 45 | |||
| 300 | 24 | 60 | |||
| 400 | 36 | 90 | |||
| 600 | 48 | 120 |
