Audited Supplier
Alkaline type
Industry
ISO, CE, ASME
New
Low
Tank, Pump, Vaporizer, etc
Gas Manufacturing
≥ 99.999%
12 Months
380V-6kv
Engineers Available to Service Machinery Overseas
According to Its Capacity
Hydrogen
Medium
Hang Tong
Standard Package
According to customer requirments
China
Product Description
High Quality Alkaline Type Water Electrolysis Hydrogen Generator Electrolyzer with Solar Green Energy
H2 generation
Alkaline-type hydrogen systems
ADVANTAGES OF ALK ELECTROLYZER
stack output pressure 1.5-3.2 Mpa (without compresor)
Large capacity of single stack (2000Nm3/h = 10MW)
Large capacity of single purification unit (8000Nm3/h)
High efficiency
DC power consumption :4.3~4.6kwh/Nm3 H2
AC power consumption :4.6~5.0kwh/Nm3 H2
Independent intellectual property rights
Fully automatic operation
Less construction area and investment cost
Less operation and maintenance costs
PEM-type hydrogen systems
ADVANTAGES OF PERIC PEM ELECTROLYZER
Both normal and pressurized stack (0-4.0 MPa)
Large capacity of single stack (300Nm3/h = 1.5MW)
Large capacity of single system (1.5MW×4 stacks=6MW)
Area saving (1/5 compared with ALK)
High efficiency
DC power consumption ≤4.3kwh/Nm3 H2
AC power consumption ≤5.0kwh/Nm3 H2
Independent intellectual property rights
Fully automatic operation
The amount of hydrogen produced is 50 ~ 60000 Nm3 / h. It has the advantages of low investment cost, low operation cost, mild reaction conditions and hydrogen purity of 99.999%;
Various hydrogen rich gases, such as propane dehydrogenation off gas, polysilicon off gas,synthetic ammonia off gas,coke oven gas,chlor-alkali off gas etc., are pretreated after pressurization according to the actual situation.
After removing the impurities unsuitable for PSA treatment, the product hydrogen is output after PSA purification.
H2 generation
- Long-term experience of the products and technologies in hydrogen generation by water electrolysis.
- We have manufactured more than 1000 sets of H2 electrolyzer plant with the highest reliability and advanced technology, successfully supplied to both domestic and international customers.
- Top manufacturer for alkaline and PEM water electrolysis as per hydrogen generation
Alkaline-type hydrogen systems
ADVANTAGES OF ALK ELECTROLYZER
stack output pressure 1.5-3.2 Mpa (without compresor)
Large capacity of single stack (2000Nm3/h = 10MW)
Large capacity of single purification unit (8000Nm3/h)
High efficiency
DC power consumption :4.3~4.6kwh/Nm3 H2
AC power consumption :4.6~5.0kwh/Nm3 H2
Independent intellectual property rights
Fully automatic operation
Less construction area and investment cost
Less operation and maintenance costs
PEM-type hydrogen systemsADVANTAGES OF PERIC PEM ELECTROLYZER
Both normal and pressurized stack (0-4.0 MPa)
Large capacity of single stack (300Nm3/h = 1.5MW)
Large capacity of single system (1.5MW×4 stacks=6MW)
Area saving (1/5 compared with ALK)
High efficiency
DC power consumption ≤4.3kwh/Nm3 H2
AC power consumption ≤5.0kwh/Nm3 H2
Independent intellectual property rights
Fully automatic operation
The amount of hydrogen produced is 50 ~ 60000 Nm3 / h. It has the advantages of low investment cost, low operation cost, mild reaction conditions and hydrogen purity of 99.999%;
Various hydrogen rich gases, such as propane dehydrogenation off gas, polysilicon off gas,synthetic ammonia off gas,coke oven gas,chlor-alkali off gas etc., are pretreated after pressurization according to the actual situation.
After removing the impurities unsuitable for PSA treatment, the product hydrogen is output after PSA purification.
