Audited Supplier
jiulong rosin size
25586-20-3
C19h29cooh
232-475-7
CCIC, REACH
Yes
White
Liquid
Sizing Agent
Paper Processing Chemicals
Water Treatment Chemicals, Coating Auxiliary Agent
50max
Rosin Size
5-30c
Within 7 Days
6-12months
2-4
Anionic
Freely
Yes
Jiulong
200kgs/1000kgs
25%min
China
38099200
Product Description
Technical Date Sheet
Product Introduction:
This product is a kind of anionic high dispersion type rosin emulsion, made of first grade rosin and high-efficiency emulsifier by the most advanced production technology. It has the character of good stability, no sediment within shelf time, no caking phenomenon, good stable sizing effect in hot summer. This product can replace the traditional fortified rosin, significant improve the paper properties, greatly reduce production cost.
Specification:
Appearance: Milk White Liquid
Solid Content (%): 40%±2%
Density: 1.02-1.04
PH: 5-6
Viscosity(25ºC): 50mpa.s Max
Particle Size: 0.5micron Max
Application:
Package:
Packing: 200kg or 1000kg plastic drum
The product should be stored in ventilated, dry, cool place.
Shelf time is 3 month.
Vision
Product Introduction:
This product is a kind of anionic high dispersion type rosin emulsion, made of first grade rosin and high-efficiency emulsifier by the most advanced production technology. It has the character of good stability, no sediment within shelf time, no caking phenomenon, good stable sizing effect in hot summer. This product can replace the traditional fortified rosin, significant improve the paper properties, greatly reduce production cost.
Specification:
Appearance: Milk White Liquid
Solid Content (%): 40%±2%
Density: 1.02-1.04
PH: 5-6
Viscosity(25ºC): 50mpa.s Max
Particle Size: 0.5micron Max
Application:
- This product should avoid mixed using with other traditional fortified rosin. When switching, remember to clean all pulp in pulp chest.
- If using forward sizing or reverse sizing, this product must be diluted with cold water to 2% solution first, and then add it into the pulp, that will ensure mix well; if using continuous sizing ahead of net, then no need to dilute.
- In application, the key is PH value, the optimal range is 4.5-5.5
- Filler will negatively affect the sizing effect, especially calcium salt, so usually after adding anionic rosin dispersion and alum about twenty minutes later, then add the filler.
| Appearance | Milky white liquid |
| Ionicity | Cationic |
| Solid content | 35%±1 |
| Particle diameter | 0.6~0.8um |
| PH Value(25ºC) | 2-4 |
| Viscosity(25ºC) | 100mPa.s |
Packing: 200kg or 1000kg plastic drum
The product should be stored in ventilated, dry, cool place.
Shelf time is 3 month.
