Audited Supplier
380V Electric Motor Power Trowel with 4 Blades for Sale
The ACE Walk Behind Power Trowel enables the professionaly finisher to achieve greater productivity.We carry a wide range of walk behind power trowels working diameter form 600mm to 1200mm .With the widespread acceptance of the adjusting system that rates flatness,the large gearbox provides torque needed for floating and high speeds need for finishing .When choosing a walk behind power trowel you must consider how big of an area you are trying to cover,the type of concrete mix,weather conditions,and if there are any obstructions and narrow doorways.
power trowel is used to create a level, smooth finish on a large, flat area of concrete, such as an interior floor, or a poured patio slab for a deck. They use single or multiple blades that rotate in a safety cage. Use a pushable concrete power trowel or riding model based on the size of your job. Blades measure from 24 to 46 inches long and come in three types: floating, finish and combined.
| PRODUCT DESCRIPTION |
1. Independent rotating flywheel, allowing operation in tight corners and in confined spaces.
2. Foldable handle for easy transportation and storage.
3. Lifting hook is available as standard.
4. Over-built gearbox assure long service life.
5. Heavy-weight design to assure a superior finish.
6. Height adjustable handle, assures operator comfortable and easy control.
7. Centrifugal saftely switch, shuts the engine down in the event of the opertor loosing control.
8. Screw control ensures precise blade adjustment.
9. Throttle control is available as optional.
| TECHNICAL SPOECIFICATION |
| Model | HMR-60 | ||
| Engine Model | HONDA GX160 | Lonxin GF200 | Robin EY20 |
| Engine type | 4-stroke 25°Single-cylinder with Air-cooled | ||
| power | 5.5HP | 6.5HP | 5.0HP |
| Working speed | 70~130 RPM | ||
| Pan Diameter | 600mm | ||
| Working Width | 600mm | ||
| Blade size | 230*150mm (9 *6") | ||
| Cluth type | Automatic centrifugal clutch | ||
| N.W / G.W | 68KGS /78KGS | ||
| Packing size | 67X 67 X 75 CM | 67X 67 X 75 CM | 67X 67 X 80 CM |
| Optional Engine | B&S 5..0HP/6.5HP | Kohler Ch260 6.0HP | EX17 6.0HP |
| ASSEMBLY LINE |
| |
| PACKING PICTURE |
| Hot Products |
| | | |
| Excavator | Surface Finishing Screed | Concrete Vibrator | Power Trowel |
| | | |
| Remote Control Trowel | Concrete Mixer | Plate Compactor | Compactor Machine |
| | | |
| Drywall Sander | Steel Bar Cutter | Vibratory Roller | Steel Bar Bender |
| FAQ |
| 1. Do you guarantee safe and secure delivery of products? Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge. |
| 2. Can you supply the relevant documentation? Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required. |
3. What is the average lead time? For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when we have received your deposit, and we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so. |
