***EXTRUSION BLOW MOLDING MACHINE EXPERT***
Extrusin Blow oMolding Machine DSB120


Extrusion blow molding machine ABLD120
Basic parameters | Suitable material | PE | |
Max volume | 250L | ||
Output capacity | 20~25 pcs/h | ||
Size | 8.6×3.8×5.8 (M) | ||
Weight | 38 T | ||
system | Specification | Parameters | Note |
Plasticizion system | Summarize | High efficient low power consumption plasticizion system,transducer control,self-protect function when started at low temperature | |
Reducer | Hard finishing,High intension,Low noise reducer | ||
Screw | ∮120mm,L/D ratio 28, 38CrMoALA | Cooling system available | |
Plasticization | 320~400 Kg/H | HDPE | |
Heating Zone | 5~6 Aluminum Heater | Automatic heating | |
Heating power | 36KW/H | ||
Extrusion Motor | Motor 132kw (380V,50HZ) | ||
Cooling Fan | 5~6zone | Automatic cooling | |
Extrusion system | Summarize | High-grade alloy steel, center feeding | |
Die head number | 1 | ||
Center distance of die heads | / | ||
Max die mouth | ∮600mm | ||
Heating zone | 6 Stainless steel heating cycle | ||
Clamping system | Summarize | High intension, rigidity, center mold locking, stable mould opening and clamping system | |
Clamping force | 850~900KN | ||
Template distance | 850~1850mm | ||
Max mould size | 1200X1800mm | ||
Mould material | High grade 50# steel | ||
Electric system | Summarize | PLC+ touch screen(man-machine interface)standard extrusion blow molding machine controlling system(AUTO monitoring, fault-alarm, auto counting ,auxiliary function available) | Japanese Mitsubishi PLC system |
Operate interface | Touch screen, automatic self-diagnose alarm system | ||
Temperature control | Automatic temperature control module | ||
Movement control | Japanese Mitsubishi, Chinese/English Version | ||
Electric protection | Ampere overload, electric short circuit self-protection function | ||
Hydraulic system | Summarize | Multiple function hydraulic integrated block Proportional control, high efficient | |
Oil pump motor | Three phase asynchronous motor (380V/220V,50/60HZ) 22kw | ||
Oil pump | Imported double pump | ||
Valves | Imported oil pump valves and connections | ||
Oil pipes | Double layer overpressure resistant | ||
System pressure | 60Kg/cm² | ||
Cooling system | Separate water cooling cycle, oil cooler cooling system | ||
Pneumatic system | Summarize | Taiwan AIRTAC pneumatic system | |
Air pressure | 1Mpa | ||
Air displacement | 1.8M3/min | ||
Electromagnetic valve | AIRTAC | ||
Cooling system | Summarize | Separate cooling system of mould, barrel and oil system | |
Cooling medium | Water | ||
Water flow | 18t/h | ||
Water pressure | 0.3-0.6MPa |



Biggerplaten size capable to carriage more bigger
More precision carriage stroke and easier to adjust all casting process ensure longer life for clamping system.


Intelligent man-machine system & easy operation
Parison control 100 points available for parison thickness control
Available of self-diagnose function in function pages.
Which is one of the best & most reliable servo system for hydraulic.
FEATURES
1. Energy Saving
Energy savings at least 40% greater than conventional fixed displacement pump systems (The energy-saving effect varies depending on the operation conditions.)
2. High Accuracy with Simple Operation
High-Accuracy servo control according to analog pressure (P) / flow rate (Q) voltage commands
3.Longer life for hydraulic units & O sealings
MOOG Servo motor due to its instant reaction speed, it does not require always running like traditional induction motor, so the hydraulic oil temperature is lower, which protect the hydraulic units and O-rings to use more longer life.
Simple adjustment to start a trial run on the machine, meaning a shorter adjustment time
5. Improving the Working Environment
Reduced noise during operation
6. Exceeds Standard of High Efficiency Motor regulation
Incorporating a motor dedicated to servo-based rotational speed control
Since no induction motor is used, the maximum discharge rate of the pump does not fluctuate depending on the power supply frequency, making it unnecessary to adjust the machines' maximum speed for each shipping destination.
High Quality Blow Molding mould
In the process of plastic blow molding, the mold is a very important part. A good blow mould can make the product production more smoothly, and a good blowing mold can also make the finished product more flexible and beautiful.
We have our own mold production workshop, using high configuration equipment and mold engineers with 16 years of technical experience to customize blow molding mold for you.
- We use the best stainless steel S136H or Aluminium alloy 7075# as mould main material- Necking plate use JAPAN DC53 Heat
treatment to HRC62
- Double neck design available to change in future as a spare part necking
- All mould can be made auto-deflashing or manual deflashing as per customer requests
- Perfect mould cooling design to ensure the best moulding preformace
- Available to provide 2D & 3D product drawing for customers
- Available to send samples to customer for approval the product quality
- We had already made moulds for TOTAL,SHELL,GULF,BMW,YAMAHA,MOBIL,TOYOTA,MENGNIU, HYUNDAI,MENTHOLATUM,UNILEVER,LEE KUM KEE...
DAWSON MACHINERY & MOULD GROUP
DAWSON will be your reliable friend in China, and we will always do our best to give you max support!
FAQ |
Q: Can we visit your factory? Sure. We located in Zhangjiagang city which is very near Shanghai. For overseas customers, you can fly to Shanghai Pudong International Airport. We can pick you up in the Airport. (or Hongqiao International Airport. ) We also provide visit online by video. Q: How can we get the exact price of plastic machine? Contact us with the products size, shape, annual quantity and photo if possible. We can recommend our machine models with quotation. Q: Do you provide any spare parts with machine? Yes, we offer all necessary spare parts before shipment.(contact us for packing list ) Q: How about your after-sale service ? We offer manual instruction and engineer training before loading,after shipment we provide 24 HRS online support, video technical support or field installation assist. Q: What is the lead time? For customized machine, it takes about 45-50 days after deposit. For stock machine, fast shipment. ( The actual production cycle will vary according to the degree of customization.) Q: What is the warranty period for your machine ? 12 months warranty for components and technical support . Q: Do you provide custom machines? Most of our machines are customized. Our goal is efficiency and stable performance. We design the machines according to customers products to meet customer' needs. Q: How can we install the machine when it arrives? We can send experienced technicians to customer's country for guiding the installation and commission the machine, also train the customer's employees. Q: What's DAWSON's advantage? DAWSON provide customers with turnkey projects. Including plant design, plastic machine and mold installation, debugging, also we can source the auxiliary equipments for customers. We can ship the full set of machines after testing in our factory. It will save a lot of cost and time. DAWSON will be your reliable friend in China, and we will always do our best to give you max support! |