Audited Supplier
About CNC Automatic High-Speed Circular Saw Machine:
1. Man-Machine Interface System
The easy-to-operate intelligent automated servo system with user-friendly touch screen and PLC control system ensures the efficiency and reliability of program operation.
2. One-Piece Machine Foundation
The machine foundation uses high strength casting ensures stable machine performance, high cutting efficiency,and precision. Foundation is equipped with a circulating water cooling tank, which can satisfy the needs of using water-based coolant fluid when cutting tough alloy steel materials.
3. New Gearbox Structure
The innovative designed gearbox structure and configuration apply to a wide range of cutting materials.
4. Remnant Management Device (Third vise)
The unique short remnant clamping structure(P series)changed from a single cylinder to double cylinder separate actions with a vertical clamping device, increase the devise stability and reliability, blade lifetime, yield rate, and saves costs.
5. Innovative Automatic Feeding Device
The material feed utilizes a servo-controlled motor with ball screw and linear guiding. Specially designed structure of feed clamp yaw effectively increases the precision and reliability.
6. Spray-Mist Lubricant Cooling System
The advanced MQL circular saw blade spray-mist lubricant technology can increase blade service life.
Standard | Optional | |||
| 1 | One set of two-axis electrical system | 1 | Oil mist collector | |
| 2 | Hydraulic system | 2 | Extended feed loader | |
| 3 | Automatic spray-mist lubrication system | 3 | Power-driven wire brush | |
| 4 | Automatic material feed loader | 4 | Cooling water pump | |
| 5 | Spiral type chip conveyor | 5 | Automatic chain type chip conveyor | |
| 6 | Wire brush | 6 | Third Vise | |
| 7 | One air spray gun | 7 | Extended carrying device for cut-off workpiece | |
| 8 | Circular saw blade | |||
| 9 | One set of tool kits | |||
| P SERIES HD-100P CIRCULAR SAW MACHINE TECHNICAL DATA | ||
| Specifications | HD-100P 2-Axis | |
| CUTTING CAPACITY | Round bar (mm) | 20-100 |
| Square bar (mm) | 20-80 | |
| Trimming length (mm) | 10-100 | |
| Single feed length (mm) | 5-800 | |
| Remnant length (mm) | 70 | |
| Perpendicularity tolerance (mm) | ±0.05/100 | |
| SAW BLADE | Dimensions (mm) | Φ360 x Φ40 x T2.6/t2.25 |
| Pin hole (mm) | Φ90/4/Φ12.5 | |
| Number of teeth (Z) | 54, 60, 72, 80, 100, 120 | |
| PARAMETERS | Working voltage (V) | 380 |
| Total power (KW) | 18.5 | |
| Machine weight estimated (Loader included) (KG) | 5000 | |
| Machine dimensions estimated (mm) | L 2700 x W 2050 x H 1790 | |
| Machine dimensions estimated (loader included) (mm) | L 7180 x W 2050 x H 1790 | |
| LOADER | Number of pieces (P) | Φ100 x 6 m x 10 |
| Length (m) | 3-6 m | |
| * Please note: all product technical information, parameters, specifications, dimensions, and designs shown in this catalog are subject to change without prior notice. For more information, please contact Hengerda. | ||
