Audited Supplier
pvdf
PVDF
High-Performance Plastic
39-59MPa
1.76-1.78g/cm3
300-450%
42-55
1.9-2.2gpa
80
-30~150
Hongda
Pallet, Plywood Case
China, Hunan
Product Description
Product name
High Quality PVDF valve and pipe fittings
PVDF (PolyVinylidene Fluoride) is a specialty plastic material in the fluoropolymer family. Its tensile strength is two times higher than PTFE, the compressive strength six times higher than PTFE, and the abrasion resistance similar to nylon. PVDF can be injected, molded to sheet, rod, pipe and is widely applied in the fields of photovoltaic, semiconductor, aviation and aerospace, electric plating, chemical anti-corrosion lining, tube, pump, valve, gasket, impeller and electrical wire& cable protection.
Features:
Appearance: smooth surface, uniform texture, white color
1.High mechanical strength & rigidity
2.Good toughness
3.Good sliding and abrasion resistance
4.Self-extinguishing
5.UV resistant
6.Corrosion resistant
7.Good aging resistant and electrical insulation
Typical application:
1.Photovoltaic
2.Semiconductor
3.Electrical plating, photovoltaic
4.Chemical corrosion resistant lining
5.Chemical storage and handling, such as tube, pump
6.Electrical wire and wire protection
Technical index and specification (mm):
Products available
Company introduction
Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.The products sell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry,semiconductor, gas&oil, pump&valve, water treatment...
Key equipment
High Quality PVDF valve and pipe fittings
PVDF (PolyVinylidene Fluoride) is a specialty plastic material in the fluoropolymer family. Its tensile strength is two times higher than PTFE, the compressive strength six times higher than PTFE, and the abrasion resistance similar to nylon. PVDF can be injected, molded to sheet, rod, pipe and is widely applied in the fields of photovoltaic, semiconductor, aviation and aerospace, electric plating, chemical anti-corrosion lining, tube, pump, valve, gasket, impeller and electrical wire& cable protection.
Features:
Appearance: smooth surface, uniform texture, white color
1.High mechanical strength & rigidity
2.Good toughness
3.Good sliding and abrasion resistance
4.Self-extinguishing
5.UV resistant
6.Corrosion resistant
7.Good aging resistant and electrical insulation
Typical application:
1.Photovoltaic
2.Semiconductor
3.Electrical plating, photovoltaic
4.Chemical corrosion resistant lining
5.Chemical storage and handling, such as tube, pump
6.Electrical wire and wire protection
Technical index and specification (mm):
| Item | Unit | Test method/condition | Index |
| Density | g/cm 3 | ASTM D792 | 1.76-7.18 |
| Tensile strength | MPa | ASTM D638/23 Celcius degree | 39-59 |
| Elongation at break | % | ASTM D638/23 Celcius degree | 300-450 |
| Hardness | shore | Durometer | D75-85 |
| Coefficient of linear expansion | 1/celcius degree | ASTM D699/23-60 Celcius degree | 4.2×10 -5 |
Products available
| Item | Thickness | Width | Length |
| Molded sheet | 6-50 | 1000×2000 1220×2440 1500×3000 | |
| Extruded sheet | 1-15 | 1000-1500 | ≤10000 |
| Lining sheet(with backing polyester &glass fiber) | 2-6 | 1000-1200 | ≤10000 |
Company introduction
Hongda was founded in 1999 and it is a professional manufaturer of high-performance plastics in the form of semi-finished products and finished parts.The products sell well throughout the country and exported to more than 20 countries&areas, which are widely used in chemical industry,semiconductor, gas&oil, pump&valve, water treatment...
Key equipment
