Audited Supplier
Poe C13060
Photodegradable
9002-88-4
/
/
Poe
General Plastics, Engineering Plastics, Specialty Plastics
Thermoplastic Plastics
Film Pressure
White
Poe C13060
863
Free
7·15days
Carton
25Kgs/Bag
China
3906100000
Product Description
Product Description
Product name:High quality Polyolefin Elastomers Plastic Raw Material Poe C13060 Resin Polyolefin Elastomer Granules
Poe is a thermoplastic elastomer that realizes in-situ polymerization of ethylene and octene with metallocene catalyst. There are two kinds of Poe, one is the polymer of ethylene and butene, and the other is the polymer of ethylene and octene; It is a flexible transparent soft plastic with small proportion (smaller proportion than PP) and light density. It is very easy to process and shape.
Application
1)Mainly used for toughening PP,PE ,PA in automobile industry manufacturing bumper, fender, steering wheel,
pad and so on.
2)Insulation and sheathing with high requirements for heat and environmental resistance in wire and cable industry.
3)Also used for industrial products such as hose, conveyor belt, rubber cloth and molded products.
4)Medical appliances and household appliances, sporting goods, toys, etc., as well as packaging film, etc.
5. Cosmetics, food and other flexible packaging; Sports sole foam sole, out sole, etc;
6. Flame retardant master stock;
7. Stretch film, winding film, all kinds of plastic wrap;
8. Also used for industrial pressed products such as rubber hose, conveyor belt, tape and molded products.
2.Storage:
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.
3.Transportation:
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited. 
Product name:High quality Polyolefin Elastomers Plastic Raw Material Poe C13060 Resin Polyolefin Elastomer Granules
| Customization: | Available |
|---|---|
| Feature: | Photodegradable |
| CAS No.: | 9002-88-4 |
Poe is a thermoplastic elastomer that realizes in-situ polymerization of ethylene and octene with metallocene catalyst. There are two kinds of Poe, one is the polymer of ethylene and butene, and the other is the polymer of ethylene and octene; It is a flexible transparent soft plastic with small proportion (smaller proportion than PP) and light density. It is very easy to process and shape.
It is widely used as auto parts, such as auto bumper, auto interior trim, PP modification industry, packaging materials, sporting goods, wire and cable, low smoke halogen-free wire materials, building decoration materials, stationery and daily necessities. It is mainly used as PE and polypropylene PP toughening agent.
Application1)Mainly used for toughening PP,PE ,PA in automobile industry manufacturing bumper, fender, steering wheel,
pad and so on.
2)Insulation and sheathing with high requirements for heat and environmental resistance in wire and cable industry.
3)Also used for industrial products such as hose, conveyor belt, rubber cloth and molded products.
4)Medical appliances and household appliances, sporting goods, toys, etc., as well as packaging film, etc.
5. Cosmetics, food and other flexible packaging; Sports sole foam sole, out sole, etc;
6. Flame retardant master stock;
7. Stretch film, winding film, all kinds of plastic wrap;
8. Also used for industrial pressed products such as rubber hose, conveyor belt, tape and molded products.
| POE 8450 | |||
| Physical Properties | Test Standard | Value | Unit |
| Desnity 23ºC | ASTM D792 | 0.902 | g/cm³ |
| Melt Index 190ºC 2.16kg | ASTM D1238 | 3 | g/10min |
| Mooney Viscosity ML1+4 121ºC | ASTM D1646 | 10 | MU |
| Hardness Properties | Test Standard | Value | Unit |
| Shore Hardness A 1s Compression Molded | ASTM D2240 | 90 | |
| Shore Hardness D 1s Compression Molded | ASTM D2240 | 41 | |
| Mechanical Properties | Test Standard | Value | Unit |
| Tensile Strength Break 510 mm/min Compression Molded | ASTM D638 | 22.4 | MPa |
| Tensile Modulus Compression Molded | ASTM D638 | 7.3 | MPa |
| Elongation Break 510 mm/min Compression Molded | ASTM D638 | 750 | % |
| Tear ing Strength Die C | ASTM D624 | 90.2 | KN/m |
| Flexural Modulus | ASTM D790 | 75.6-76.3 | MPa |
| Thermal Properties | Test Standard | Value | Unit |
| Vicat | ASTM D1525 | 84 | ºC |
| Melting Temperature DSC 10ºC/min | - | 97 | ºC |
| TG | Internal methods | -32 | ºC |
| Crystallization Temperature DSC | 80 | ºC | |
1.Packing:
25kg/bag, or per your requirement.18mt-20mt /20'FCL2.Storage:
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.
3.Transportation:
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.
