Audited Supplier
TMG20D-440
Spiral
RO
Aromatic Polyamide
Spiral Wound
34 Mil
15%
5-45
3-11
1.0 Ntu
<0.1
15 Psi
Available
96.5%
225psi
Toray
Carton
TM720D-400
China
8421999090
Product Description
Toray brackish water membranes
Following 4", 8" and 16" membranes can be used in multiple membrane systems to treat municipal industrial or process water as well as commercial application using the 4" membrane types.
For individual membrane selection by application or membrane type please use the membrane product search feature
1. Please consult the latest Toray technical bulletin, design guidelines, computer design program, or call an application specialist for the recommended design range. Not strictly following the operating limits stated in this bulletin will void and nullify the Limited Warranty
2. All RO elements are wet tested treated with a 1 percent by weight sodium bisulfite storage solution. Afterward, the RO elements are vacuum packed in oxygen barrier bags or treatedwith a tested feed water solution, and then vacuum sealed in oxygen barrier bags with deoxidant inside. Toray recommends flushing Toray RO elements for 30 to 60 minutes onceevery two days with sufficient quality flushing water, such as pre-treated feed water, toprevent biological growth during system shutdown. Please refer to the Toray RO Handling Manual for suggested flushing water quality.3. The presence of free chlorine and other oxidizing agents under certain conditions, suchas heavy metals that act as oxidation catalysts in the feed water, will cause unexpected oxidation of the membrane. Toray strongly recommends removing these oxidizing agents contained in feed water before operating the RO system.
4. Permeate from the first hour of operation shall be discarded.
5. The customer is fully responsible for the effects of chemicals that are incompatible with theelements. Their use will void the element Limited Warranty.
6. Maximum operating pressure will vary depending on feed temperature. Please ask for detailed information from Toray if needed.
7. Toray accepts no responsibility for results obtained by the application of this information orthe safety or suitability of Toray's products, either alone or in combination with other products.Users are advised to make their own tests to determine the safety and suitability of eachproduct combination for their own purposes. All data may change without prior notice, due to technical modifications or production changes.Please be sure to inguire about the latest products pecifications.
