Audited Supplier
KY-C-3-5
Engineer Installation and Commissioning
Wire Straightening Machine
Wire
220V/380V/415V/440V (Customized)
Automatic
Large Deformation
ISO9001, CE, SGS
12 Months
Customized
New
350
2.5-5 mm
30-40 M/Min
0.75 Kw
500-3000 mm (or as Your Reque
2400 R/Min
Key Control
Metal Wire (Low Carbon Steel Wire, Galva
Wire Straightening and Cutting M
Motor
KAIYE
Wooden Pallet and Plastic Package in The Container
7500mm*700mm*1200mm
an Ping He Bei China
84622910
Product Description
Automatic high speed wire straightening and cutting machine
1.The equipment is mainly used for automatically straighten stainless steel wire, galvanized wire, aluminum wire, cooper wire, and cut automatically according to the preset length.
2.Automatic wire straightening and cutting machine operation and maintenance are simple. It is mainly used for straightening and cutting the wire with diameter less than 6 mm and the maximum cutting length is less than 2 metres.(But we can set the length of wire according to customer's requirement).
3.Automatic wire straightening and cutting machine processing performance is strong, almost can process any diameter, any length of wire, high degree of automation, automatically set straightening and cutting length, . Mainly used for straightening and cutting building cold-rolled steel wire and rebar, hot-rolled steel wire, hot-rolled round steel wire and cold-rolled steel bar etc.
4.The straightening machine is composed of a frame, a straightening mechanism, a feeding mechanism, a cutting mechanism, a linear gun and a wire frame.
5.The straightening part is composed of a straightening shaft, a straightening pressing block and two bearing blocks to complete the straightening work of the wire, the power is the motor mounted under the machine frame, and the straightening shaft is rotated at a high speed by the triangular tape.
6.The feeding wheel/ the cutter, etc. are made of excellent alloy steel and are vacuum-treated to make them wear-resistant and have a long service life. Straightening block are made of cast iron\alloy\plastic king, etc. All shafts are made of 40CR or 45# steel and are quenched and tempered. The gears are all made of forging blanks, quenched and tempered and tooth surface high-frequency quenched, the hardness is up to HRC55-58 degrees. It is suitable for galvanizing wire, powder drawing wire, water drawing wire and stainless steel wire.
Mechanical advantage
1. Adopt the totally enclosed type case, featured with high security.
2. Adopt cartridge valve, featured with compact structure and convenient adjustment.
3. The oil-way controlling part is hidden under the panel which can resist dust effectively.
4. The feed inlet adopt rotary scuff sleeve, featured with simple structure and easy change.
5. Part of the funnel structure was closed which is convenient for dust-cleaning.
6. The structure of the cradle is more reasonable, as well as new appearance.
7. The straightening motive power came from the large power motor which can ensure a long time stable operation.
8. The installation of traction and straightening motive power adopt adjustable structure, which is easy to maintain.
1★ Time-saving: two times the cutting number of the normal steel bar cutter.
2★ Labor-saving: Cut different sizes of steel bar without changing the blade.
3★ Precise straightening : the straightness of straightening wire is ±1 mm
4★ Easy operation.
5★ Worry-saving: The main components can last for ten years which almost cost you nothing for maintenance.
Mechanical structure.
Mechanical structure adopt the totally enclosed type case, featured with high security.Simple and elegant appearance.
Protection cover
High speed parts of machinery will be covered with protective cover to ensure the safety of employees.
Wire rack.
The rack adopts cartridge valve, which is easy to adjust. The length of wire straightening can be changed freely.
wire casing.
Each machine has 3 slots to choose from. It is convenient for us to use the appropriate wire diameter.
Straightening system
The straightening system adopts special design, precision machining accuracy is very high, and it is easy to adjust the mold.
Cutter
The cutter is made of special alloy with high hardness and durability.
Model | KY-C-3/5 | KY-C-4/8 |
Wire Diameter | 3-5 mm | 4-8 mm |
Cutting Length | ≤3000mm (Customizable) | ≤3000mm (Customizable) |
Cutting error | ±1mm | ±1mm |
Cutting Speed | 20-40m/min | 20-40m/min |
Straightening accuracy | ≤1 mm | ≤1 mm |
Motor power | 2.2kw+0.75kw | 3.0kw+1.5kw |
Weight | 350 KG | 480 KG |
Mechanical dimension | 4800mm*800mm*1200 mm | 5800mm*800mm*1200 mm |
Shipping
We will send the machinery to the port, or according to the customer's requirements to the designated place.
Packaging
The main machinery will be packed in wooden cases, and the small mechanical parts will also be wrapped with plastic film and put in wooden cases.
Factory History
Hebei Kaiye Machinery Equipment Co., Ltd. was established in 2002. We are mainly engaged in the R & D, design, production and sales of CNC steel wire processing equipment, providing overall solutions for CNC steel wire processing. Products are widely used in railway, highway, bridge, tunnel, real estate, animal husbandry and other large-scale infrastructure construction, steel processing and distribution center and other fields.
Factory R&D Team
Factory R&D Team
The factory has a strong and experienced R&D team. The average working life of team engineers has exceeded 8 years. Our technology is along the most advanced international route, and we can design reasonable solutions according to the requirements of customers.
Factory workshop
We have our own wire mesh machinery and several pilot plants with strong technical force and advanced production and checkout equipment.Our main products: wire mesh welding machine, EPS 3D panel machine, reinforcement mesh welding machine, Gabion mesh machine, hexagonal wire mesh machine,wire drawing machine, expanded metal machine,chain link fence machine, CNC stirrup rebar bending machine .
Friends from all over the world.
The company's machinery and equipment sell well in China, and are exported more than 100 countries and regions such as Romania, Lithuania, Turkey, Poland, Belarus, Ukraine, Russia, Kazakhstan, Saudi Arabia, Egypt, Algeria, South Africa,Vietnam, Thailand, India, Pakistan, Philippines, Indonesia, Australia, Mexico, Colombia, Argentina, Bolivia, Brazil, etc.
After more than ten years of development, the company has grown into one of the leading enterprises in the industry. We adhere to the tenet of "customer first, technology leading". In the future, the company will comprehensively promote industrial development and upgrading, and build the world's leading steel processing equipment.
A: Our company is a factory integrating production and sales. We can provide competitive prices and services.
Q:Where is your factory located?
A: Our factory is located in Anping county, Hebei Province of China. The nearest airport is Beijing airport or Shijiazhuang airport. We can pick you up from Shijiazhuang city.
Q: How many years are your company engaged in the wire mesh machines?
A: More than 20 years. We have our own technology develop department and testing deparment.
Q: Can your company send your engineers to my country for machine installation, worker training?
A: Yes, our engineers went to more than 60 countries before. They are very experienced.
Q: What's the guarantee time for your machines?
A: Our guarantee time is 2 years since the machine was installed in your factory.
Q: Can you export and supply the customs clearance documents we need?
A: We have much experience for exporting. And we can supply the CE certificate, Form E, Certificate of origin, Certificate of quality etc, your customs clearance will be no problem.
Q: Are you a trading company or manufacturer?
A: Our company is a factory integrating production and sales. We can provide competitive prices and services.
Q:Where is your factory located?
A: Our factory is located in Anping county, Hebei Province of China. The nearest airport is Beijing airport or Shijiazhuang airport. We can pick you up from Shijiazhuang city.
Q: How many years are your company engaged in the wire mesh machines?
A: More than 20 years. We have our own technology develop department and testing deparment.
Q: Can your company send your engineers to my country for machine installation, worker training?
A: Yes, our engineers went to more than 60 countries before. They are very experienced.
Q: What's the guarantee time for your machines?
A: Our guarantee time is 2 years since the machine was installed in your factory.
Q: Can you export and supply the customs clearance documents we need?
A: We have much experience for exporting. And we can supply the CE certificate, Form E, Certificate of origin, Certificate of quality etc, your customs clearance will be no problem.
If you are interested in our machines,
please contact us now,
We will provide you with professional and reasonable solutions.
please contact us now,
We will provide you with professional and reasonable solutions.
