Audited Supplier
Ceramic filter is mainly used for fine coal slurry recovery, equipped with an engine base, under the engine base setting a fine coal slurry liquid trough, in this liquid trough, equipped with liquid level controller, both ends with negative pressure water tank, one side of this water tank is equipped with negative pressure connected assembly fix, another side is vacuum pump pipeline connecting with a vacuum pump; on the engine base, there is a coal slurry recovery rotor, this rotor consists of main axle, multilevel ceramic filter disc, stripper plate, multisection effluent connecting pipeline piping support plate, negative pressure connecting assembly plate. The rotor is located in liquid trough; the ceramic filter disc consists of many ceramic cavity micropore plates, those plates located in a same axes connect by the effluent connecting pipeline.
Ceramic filter is mainly consisting of roller system, mixing system, ore slurry feed and discharge system, vacuum system, filtrate discharging system, scraping system, back washing system, united washing system (ultrasonic cleaning, automatic matching acid cleaning), full-automatic control system, trough body, rack etc.
Trough body uses corrosion resistant stainless steel, can load ore pulp. Stirring system is stirring mixing materials in trough body to avoid the rapid subsidence of materials. Ceramic filter plate is installed on roller, roller can be rotated by the drive of stepless speed change reduction gears.
Filter medium of ceramic filter is ceramic filter plate, doesn't need filter cloth, that reduces cost of production. The 1mm gap between scraper and filter plate prolongs the service life while discharging.
Using back washing and united cleaning etc. methods, full-automatic control by PLC, equipped with inverter, liquid level meter etc. device. While starting up, ore pulp valve is monitored by level meter, it controls he
| Model | Filter (circle) | numberplate(block) | Tank volume(m3) | Installed power(kw) | Operating power(kw) | Length *width*height |
| BTC-1 | 1 | 12 | 0.4 | 7.6 | 6.6 | 2200*1950*1630 |
| BTC-4 | 2 | 24 | 0.79 | 9 | 7.32 | 2450*2250*1830 |
| BTC-6 | 3 | 36 | 0.94 | 10.5 | 7.98 | 2700*2250*1830 |
| BTC-8 | 4 | 48 | 1.28 | 11.5 | 8.14 | 3040*2250*1830 |
| BTC-12 | 6 | 72 | 1.79 | 13 | 7.96 | 3600*2250*1830 |
| BTC-24 | 8 | 96 | 3.96 | 23 | 16.28 | 4450*2850*2250 |
| BTC-30 | 10 | 120 | 4.6 | 25.15 | 17.95 | 5100*2850*2240 |
| BTC-45 | 10 | 120 | 5.9 | 40 | 30.4 | 5700*3200*2500 |
| BTC-60 | 14 | 168 | 8.1 | 43.81 | 30.37 | 6820*3200*2500 |
Q: How to buy your products?
A: You can provide us the waste kind and waste quantity(connect us for more details). we will recommand you the suitable equipment.
Q: How to pay?
A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
Q: What is the delivery time?
A: It depends on order quantities. Generally speaking, the delivery time will be within 3 to 4 weeks.
Q: How to pack the products?
A: We use standard package.
Q: How to install after the equipments arriving destination?
A: We will provide detailed illustrations to you. And we will send a technicians to guide for installation and debugging. after
debugging equipment, he will teach your workers how to use it and how to maintain it.
