Audited Supplier
ZS-CU
18 Months
All Life
Customized
New
CNC
Automatic
Cr12 with Hard Treatment
12
50
15.8kw
0.4-1.0
Chain
Omron
Delta
35m/Min
1-2
Plastic Coating Loading by Container
5.5m*1.2m*1.4m
China, Cangzhou
84552210
Product Description
0.4-1.0mm Thickness Light Steel Frame Machine
This shape profile roll forming machine is fully automatic and high speed producing continuously, one set of forming rolls can produce various sizes of Stud and Runner just by PLC,it is full automatic adjusting.
A drywall stud and track roll forming machine usually consists of manual decoiler, a feeding guide unit, a punching tool, a roll forming unit, a cutting unit, a transmission unit, a hydraulic unit, a control unit, and run-out tables. Under PLC control system, this drywall stud and track roll forming machine fully automatically produces 4-6 metal c studs or u tracks out of galvanized steel.
MaterialEffective width:Follow with design
Material Thickness:0.4-1.0mm
Applicable material:Galvanized Steel(GI),Hot Roll Steel(HRC),With yield strength G235-390Mpa
Work Follow
Decoiler→Feeding Guide Device→Rolling Forming System→Hydraulic Not Stop Cutting And Punching Device→ Exit Rack
Machine Components
Manual Decoiler(Double Coil):One Set
Un-powered, Manually control steel coil inner bore shrinkage and stop
Max Feeding width: 500mm,coil ID range ф460-520mm
Capacity:Max 3 Tons*1
| o. | Item | Unit | Parameter | Remark | |
| 1 | Material | ||||
| Type | PPGI, PPGL, GI, GL, PPAL | As requirement | |||
| Thickness of Material | mm | 0.3-1.0mm | As requirement | ||
| 2 | Material Width | mm | Follow with design | As requirement | |
| 3 | Production Speed | m/min | Common speed: 0-15m/min | Adjustment | |
| High speed: 20-30m/min | As requirement | ||||
| 4 | Effective Width of Product | mm | Follow with design | According to drawings | |
| 5 | Roller Material | 45#, Cr12, GCr15, GCr12MoV | As design | ||
| 6 | Drive Type | By Chain or Gear or Gearbox | |||
| 7 | Motor Power | kW | 5.5-15kW | As design | |
| 8 | Brand of Electric Control System | Delta or Siemens | Selectable | ||
| 9 | Dimension ( L* W * H ) | m | 10.5*1.45*1.5m | Based on design | |
| 10 | Warranty | Month | 15 | ||
Feeding Guide Device
The feeding guide device at the main entrance of the machine during work,Raw materials on both sides of the plate the enter into the machine by the guiding device,make the raw materials and roll forming system to maintain the correct position.The guiding position can be adjusted by the manual screw mechanism,and the feeding guide width can be adjusted independently.
We add water cooling system in the feeder,it is can reduce coil material when the weather very hot.
The feeding guide device at the main entrance of the machine during work,Raw materials on both sides of the plate the enter into the machine by the guiding device,make the raw materials and roll forming system to maintain the correct position.The guiding position can be adjusted by the manual screw mechanism,and the feeding guide width can be adjusted independently.
We add water cooling system in the feeder,it is can reduce coil material when the weather very hot.
Rolling Forming System
Forming mold: Cr12 molding steel, through vacuum quenching heat treatment to HRC60-62 °then grinding the inner
Hole and the end face. The precision machining roller surface with CNC lathe
Shafts material:40Cr steel,CNC lathes,Heat Treatment,hard Chrome Coated
With thickness 0.04mm,surface with mirror treatment(for longer life and anti-rust)
Main motor and 14 reducers combination driving,about 12-step to form
Main Motor =5.5KW,Frequency speed control
Forming mold: Cr12 molding steel, through vacuum quenching heat treatment to HRC60-62 °then grinding the inner
Hole and the end face. The precision machining roller surface with CNC lathe
Shafts material:40Cr steel,CNC lathes,Heat Treatment,hard Chrome Coated
With thickness 0.04mm,surface with mirror treatment(for longer life and anti-rust)
Main motor and 14 reducers combination driving,about 12-step to form
Main Motor =5.5KW,Frequency speed control
Hydraulic Cutting And Punching Device
Cutter stype:Not stop cutting and punching
The length of tolerance:±1.0mm(3m)
Cutter motor:Hydraulic
Servo motor power:4KW+2.3kw
Cutter stype:Not stop cutting and punching
The length of tolerance:±1.0mm(3m)
Cutter motor:Hydraulic
Servo motor power:4KW+2.3kw
Operation Panel
Control The Quantity And Cutting Length Automatically
Input The Production Data(Production Batch,pcs,Length,etc.)On The Touch Screen ,
It Can Finish The Production Automatically.
Combined With: PLC, Inverter, 10 Inch Touch Screen, Encoder, etc
Control The Quantity And Cutting Length Automatically
Input The Production Data(Production Batch,pcs,Length,etc.)On The Touch Screen ,
It Can Finish The Production Automatically.
Combined With: PLC, Inverter, 10 Inch Touch Screen, Encoder, etc
Hydraulic Oil Pump
Hydraulic oil pump with fan cooling system
Power:4kw+4kw
Gear pump
Hydraulic oil pump with fan cooling system
Power:4kw+4kw
Gear pump
Heavy quality maual decoiler:1 Set
Weight support:3T
Weight support:3T
