Audited Supplier
* The III gears is for adjustment:75-100-130m/min.It works with level 130m/min in general condition.When it is used to straighten the bars less than 2m,it will work at a lower speed.
* The cutting accuracy is high and the error of cutting length is ≤±1mm
* The straightness is high and the straightness is ≤2mm/m after straightened
* Suitable for straightening and shearing cold-rolled round bars, cold-rolled ribbed bars, hot-rolled plain bars, hot-rolled ribbed bars *Intelligent control: the machine is controlled by PLC(Siemens), text display (Siemens) operation, simple and reliable
* Low failure rate: due to the fine processing of parts and strict quality control, it can maintain trouble-free operation under normal working conditions for a long time after installation and commission .
*Advanced technology: the straightening and shearing technology of this machine is synchronized with the world's advanced level
| No. | Item | Specification |
| 1 | Steel Bar Diameter | 5-12(mm) |
| 2 | Length of Automatic Cutting | 100-12000mm(can be prolonged) |
| 3 | Error of the Cutting Length | ±1mm |
| 4 | Speed of Straightening and Cutting | 110m/min |
| 5 | Straightness | ≤2mm/m |
| 6 | Accuracy of the Length after Straightening and Cutting | ≤1mm |
| 7 | Total Power | 30+2+7.5KW |
| 8 | Rated Voltage | Three phase,380V,50Hz(according to requirement) |
| 9 | Rated Power | 4*150KVA |
