Audited Supplier
The wire winding road of Copper Wire Bunching Machine 630 is from the pay-off device through the disconnection sensing area, first pass through the main distribution board (the distribution holes are distributed according to 1+6+12+...), pass through the first line of pressure die, and then pass through the second line of pressure die, Finally enter the thread guide wheel in the right main shaft.
After passing the aluminum plate bow with the porcelain ring, it enters the thread guide wheel in the left main shaft, and then passes through the center corner guide wheel to the take-up wheel, and reaches the upper guide wheel of the aligner for traversing.(1) Max.Finished Twisting Section Area: 6.0mm².
(2) Max. speed: 1800 r/min
(3) Raw material: copper wire, tin coated wire, copper cladding aluminum wires, silver plated copper wires etc
(4) Twisting type: double twist
| Machine type | SY-630P |
| Max. speed | 1800r/min |
| Inlet individual dia. | 0.18-1.0mm |
| Standard lay length | 11.15-66mm |
| Standing section area | 0.18mm-6.0mm2 |
| Twisting direction | right or left |
| Spool dimension | MAX 630mm |
| Bobbin loading, unloading type | Manual hydraulic pressure |
| Main motor | 7.5kw |
| M/C Dimension | 2900mmL*1500mmW*1650mmH |
| Coating | Sky blue (or according to customer's requirements) |
| Pay-off | It can be a vertical passive type or 630 steel spool multi-wire type |
1) More stability, high production efficiency, low noise, and ease of operation.
2) Spring bow can prolong the life.
3) Take-up tension is controlled by magnetic powder clutch or mechanical type.
4) If the wire breaks, the machine can stop automatically.
Mentors is a professional manufacturer and exporter of wire drawing machines & cable making machines in the wire and cable field since 2008, It is successful in making all kinds of high-speed wire drawing machines, annealing and tinning machines, double twist bunching machines, extruders, etc.
Mentors Group is able to provide a whole solution. Also our engineering team with 23 years of R&D and production experience in the field of wire drawing machines and other cable-making machines. A cost-effective, highly efficient, reliable, and easy-to-operate machine is what we deliver. The independent research and development of the Copper Wire Drawing Machines have already been supplied to world well-known companies such as Sumitomo, and Jiangxi Copper Corporation(Fortune Global 500 companies). And New Design Remote Controlled Full Automatic cable making equipment, which can load and unload bobbin without an operator, to help our customers develop faster. Our products have been exported to many countries. Such as Russia, Vietnam, India, Iran, Pakistan, Ethiopia, Brazil etc.
Mentors will continue to combine the advanced technology with China's manufacturing advantage and provide wire drawing machines and cable manufacturing machines with European Standards to worldwide customers.
Q1: What's the payment terms?
A1: Standard type is 30% T/T as deposit, 70% T/T before shipping.
Q2: How about the after-sell service?
A2: The engineer will be dispatched as needed.
Q3: How much need pay for after-sell service?
A3: The buyer provides the engineer's round-trip flight tickets, board and lodging, security as well and each person's daily wage.
Q4: Can you support a complete project instead of a single machine?
A4: Yes, besides the machine, the whole solutions for raw materials, auxiliary parts, worker training, etc. can be offered.
Q5: What kind of Guarantee you can offer?
A5: 12 months since shipping date and charge for repair the whole life.
