Audited Supplier
FZ1700
Confer
Hydraulic
CE
Semi-Automatic
NEW
Overseas Third-Party Support Available
Pile Turner
Fz1700
3p 380V 50Hz
2500kg
1350*1700
Min 780mm
Max. 16MPa
14kw
Unchur
Steel Palte
CE
China
84393000
Product Description
Quotation Catalogue
Specifications
Notice:paper low 200gsm only could do turning
Key point
1.This machine contains three functions: turning, jogging and ventilation.
2.The machine is necessary auxiliary equipment in the printing process, it not only make the paper stack turned over automatically, but also make the stack tidy.
3.The machine can save in labors and avoid impact on the printed surface.
Structure
1.1 Base frame 1.2 Fork housing 1.3 Platforms 1.4 Clamping Cylinder for the Driver for the Platforms 1.5 Chain wheels 1.6 Pivot bearing 1.7 Tilting cylinder
1.8 Control cabinet 1.9 Hydraulics 1.10 Control panel 1.11 Ventilation plate 1.12 Aerating device 1.13 Blower motor 1.14 Ventilation system 1.15 Locking mechanism 1.16 Leveling feet 1.17 Jogging ruler 1.18 Main Switch
Function Feature
2. Separation of paper
•After the vibration and air jetting, the pile is filled with air cushion between of the sheets, in this way ,mis-feeding can be avoided
3. Aligning
•With the vibration platform and high pressure blower ,the whole pile paper can be aligned at one time
4. Static remove
•Air with ionized air reduces the electrostatic charge which may affect the finishing process of coated and printed paper or plastic foil
5. Turning
•For the piles of double-sided printing paper ,the pile turning will improve the work efficiency and lower the intensity of work .The working environment will be much better for workers
6. High efficiency easy operation
•For average ,the turning ,powder removing ,separation of paper and aligning, the processes takes about 3 minutes
•Easy operation without professional person
Working Processes
Configuration
Installation Requirement
Installation areas: Length*Width
Specifications
| Model FZ1200 FZ1700 |
| Weight of pile(including pallets) 1000KG 2000KG |
| Max. size of paper 800×1200mm 1350×1700mm |
| Opening width Min. 680mm 780mm |
| Max. 1440mm 1840mm |
| Electrical Data |
| Total Power 10KW 14KW |
| Hydraulic |
| Pressure Max. 16MPA |
| Hydraulic oil Summer46 Winter32 |
| Volume of oil tank12L |
| General Parameter |
| Net weight 2800KG 3500KG |
| Dimension 2370X2090X1890 mm 2550×2590×2590mm |
| Noise <70BD |
| Working environment |
| Temperature -15ºC~+50ºC |
| Humidity ventilation and dry relative humidity less than 80% |
Key point
1.This machine contains three functions: turning, jogging and ventilation.
2.The machine is necessary auxiliary equipment in the printing process, it not only make the paper stack turned over automatically, but also make the stack tidy.
3.The machine can save in labors and avoid impact on the printed surface.
Structure
1.1 Base frame 1.2 Fork housing 1.3 Platforms 1.4 Clamping Cylinder for the Driver for the Platforms 1.5 Chain wheels 1.6 Pivot bearing 1.7 Tilting cylinder
1.8 Control cabinet 1.9 Hydraulics 1.10 Control panel 1.11 Ventilation plate 1.12 Aerating device 1.13 Blower motor 1.14 Ventilation system 1.15 Locking mechanism 1.16 Leveling feet 1.17 Jogging ruler 1.18 Main Switch
Function Feature
- Dusting removing
2. Separation of paper
•After the vibration and air jetting, the pile is filled with air cushion between of the sheets, in this way ,mis-feeding can be avoided
3. Aligning
•With the vibration platform and high pressure blower ,the whole pile paper can be aligned at one time
4. Static remove
•Air with ionized air reduces the electrostatic charge which may affect the finishing process of coated and printed paper or plastic foil
5. Turning
•For the piles of double-sided printing paper ,the pile turning will improve the work efficiency and lower the intensity of work .The working environment will be much better for workers
6. High efficiency easy operation
•For average ,the turning ,powder removing ,separation of paper and aligning, the processes takes about 3 minutes
•Easy operation without professional person
Working Processes
Configuration
| Name | Brand | Name | Brand |
| Pump order | WEG | Reducer | Japan Kobe |
| High pressure air | Taiwan shenghong | Valve | Howard hydraulic |
| Linear Guides | ABBA | Bearing | C&U |
Installation Requirement
Installation areas: Length*Width
