Audited Supplier
This machine is a simplified version of the high-speed integrated machine, which has the characteristics of high efficiency, low consumption, environmental protection, and high cost performance etc.
PERFORMANCE
1. Four axis linkage, wire breaking protection.
2. Efficiency: Cutting efficiency is 15,000 m2 per hour.
3. Low consumption: 600,000-800,000 m2/one litre of cutting fluid.
4. Low noise, reasonable price.
5. Easy to maintain.
6. Especially suitable for mould processing.
7. Cutting fluid adopts the exclusive formula, which requires no replacement for lifetime. When the concentration is low, it is necessary to add cutting fluid only, rather than dumping, which is free from contamination.
TECHNICAL DATA
Taper Angle: 0~12°
| Type | GSDK7720 | GSDK7725 | GSDK7732 | GSDK7732B | GSDK7740 | GSDK7740B |
| Worktable Size (mm) | 250*420 | 330*520 | 360*600 | 410*670 | 460*680 | 520*745 |
| X,Y-axis trip(mm) | 200*250 | 250*300 | 320*400 | 350*450 | 400*500 | 450*550 |
| U,V-axis trip(mm) | 70×70 | |||||
| Max load weight (KG) | 200 | 250 | 350 | 400 | 450 | 600 |
| Max linear cutting thickness (mm) | 250 | 400mm(330) | 500mm(430) | 500mm(430) | 500mm(430) | 500mm(430) |
| Machined taper/work piece thickness | 12°/80mm | |||||
| Z-axis elevation mode | Manual/Electric Elevation | |||||
| Type of guide track | Slide guide | |||||
| Electrode wire diameter range (mm) | Ф0.15~0.20mm | |||||
| Wire speed (m/sec) | 1~11.4m/sec 7 frequency conversion adjustable | |||||
| Machining accuracy (mm) | ≤0.015 | |||||
| Max cutting efficiency(mm²/min) | ≥250 | |||||
| Optimum surface roughness (µm) | Ra≤2.5 | |||||
| Control mode | X, Y, U, V stepper motor | |||||
| Number of control axis | Four-axis linkage | |||||
| Min instruction unit (mm) | 0.001 | |||||
| Power supply | 380V/50HZ 3P4W | |||||
| Max operating current (A) | 12 | |||||
| Machine tool power consumption | <2(KW) | |||||
| Working fluid | Special for Wenjie (self-made), equipped with a concentration meter | |||||
| Working fluid tank volume (L) | 55 | |||||
| Work liquid filtrate way | Strainer, magnetic plate | |||||
| Weight (KG) | 800 | 900 | 1000 | 1100 | 1300 | 1400 |
| Size (m) | 1.06*0.8*1.1 | 1.4*0.9*1.35 | 1.5*1.2*1.4 | 1.6*1.3*1.4 | 1.7*1.4*1.4 | 1.75*1.5*1.4 |
Taper Angle: 0~12°
| Type | GSDK7740F | GSDK7750 | GSDK7750B | GSDK7750F | GSDK7763 | GSDK7763F |
| Worktable Size (mm) | 480*820 | 564*904 | 615*950 | 594*1064 | 700*1060 | 700*1200 |
| X,Y-axis trip(mm) | 400*630 | 500*630 | 550*690 | 500*800 | 630*800 | 630*1000 |
| U,V-axis trip(mm) | 70×70 | |||||
| Max load weight (KG) | 700 | 800 | 900 | 1000 | 1100 | 1300 |
| Max linear cutting thickness (mm) | 500mm(430) | 600mm(530) | 600mm(530) | 600mm(530) | 600mm(530) | 600mm(530) |
| Machined taper/work piece thickness | 12°/80mm | |||||
| Z-axis elevation mode | Manual/Electric Elevation | |||||
| Type of guide track | Slide guide | |||||
| Electrode wire diameter range (mm) | Ф0.15~0.20mm | |||||
| Wire speed (m/sec) | 1~11.4m/sec 7 frequency conversion adjustable | |||||
| Machining accuracy (mm) | ≤0.015 | |||||
| Max cutting efficiency(mm²/min) | ≥250 | |||||
| Optimum surface roughness (µm) | Ra≤2.5 | |||||
| Control mode | X, Y, U, V stepper motor | |||||
| Number of control axis | Four-axis linkage | |||||
| Min instruction unit (mm) | 0.001 | |||||
| Power supply | 380V/50HZ 3P4W | |||||
| Max operating current (A) | 12 | |||||
| Machine tool power consumption | <2(KW) | |||||
| Working fluid | Special for Wenjie (self-made), equipped with a concentration meter | |||||
| Working fluid tank volume (L) | 55 | |||||
| Work liquid filtrate way | Strainer, magnetic plate | |||||
| Weight (KG) | 1500 | 1900 | 2000 | 2100 | 2600 | 2800 |
| Size (m) | 2.1*1.5*1.4 | 2.1*1.7*1.74 | 2.15*1.8*1.74 | 2.4*1.8*1.74 | 2.4*2.25*1.65 | 2.4*2.4*1.65 |
PACKAGE
1. Shrunck plastic film + plywood case
2. Shrunck plastic film + steel pallet
3. Customerized package
WORKPIECE SHOW
OUR SERVICE
Warranty Period: 1 year
During warranty period, we can provide free parts and components that are not damaged due to improper operation (consumables are excluded). Out of warranty period, we will supply our best service to you as usual, if you have any question.
1. Offer technical support online service.
2. Technical files service & on-site training service provided.
3. Offer machine operation video.
4. Spare parts replacement and repair service provided.
5. All questions will be replied within 12 hours.
OUR FACTORY
FAQ
Q: Are you a manufacturer or trading company?
A: We are the professional manufacturer of cnc wire cut edm machine, which have been in the industry for 20 years more. All the casting and metal plates are made by ourselves.
Q: Can you provide training and maintenance?
A: Yes. In order to make your production more efficient, before the delivery, you can send someone to my company for professional operation training.
Q: What information will you need to make the proposal?
A: Worktable size, worktable travel, surface finish, machining accuracy, and your special requirement.
