Audited Supplier
588
Stainless Steel Wire
Round
Construction Wire Mesh, Protecting Mesh, Fence Mesh, Decorative Mesh, Screen, Gabion Mesh, Barbecue Wire Mesh, Filter, Cages
Stainless Steel Wire
0.01-5mm
Stainless Steel
Cold Drawing
Soft State
0.01-5mm
SGS, CE
450-2350MPa
Stainless Wire
Antirust
juyun
Roll, Spool, Pallet
0.01-5mm
China
7223000000
Product Description
Stainless Steel wires
Materials : SUS201,202,302,304,304L,430,316,316L,310S,321etc.
Diameter:0.01mm-12mm
Category:hard wire,soft wire,stainless steel sharft thread
Characteristic of stainless steel wire :
a.Excellent straightness
b.Uniform and beautiful surface condition
c.Excellent coil forming ability
d.High elasticity and high fatigue resistance
e.Strong corrosion resistance against exposure to the toughest atmosphere
Aplication:stainless steel wire mainly used in a number of industries including wire-drawing,weaving of wire mesh,soft pipe,beam of cabinet,steel wire rope,filter material and equipment,spring,making of handcrafts,etc
Materials : SUS201,202,302,304,304L,430,316,316L,310S,321etc.
Diameter:0.01mm-12mm
Category:hard wire,soft wire,stainless steel sharft thread
Characteristic of stainless steel wire :
a.Excellent straightness
b.Uniform and beautiful surface condition
c.Excellent coil forming ability
d.High elasticity and high fatigue resistance
e.Strong corrosion resistance against exposure to the toughest atmosphere
Aplication:stainless steel wire mainly used in a number of industries including wire-drawing,weaving of wire mesh,soft pipe,beam of cabinet,steel wire rope,filter material and equipment,spring,making of handcrafts,etc
| The basic information: | |||
| An English name: | stainless steel wire | The characteristics of: | Surface light, beautiful and durable |
| application: | In weaving woven wire mesh | The material: | 302,304,304L |
| The basic information: stainless steel silk, corrosion resistance, acid and alkali resistant, high temperature resistant, not easy to wear, not easy ageing, good toughness and high strength etc. | |||
| Wire diameter:(mm) | Allowable differential:(mm) | Maximum differential partial diameter:(mm) |
| 0.2-0.59 | + 0.01 / - 0.01 | 0.02 |
| 0.6-0.99 | + 0.01 / - 0.02 | 0.03 |
| 1.0-1.49 | + 0.2 / - 0.2 | 0.04 |
| 1.5-1.99 | + 0.02 / - 0.03 | 0.05 |
| 2.0-2.49 | + 0.03 / - 0.03 | 0.06 |
| 2.5-2.99 | + 0.03 / - 0.04 | 0.07 |
| 3.0-3.5 | + 0.03 / - 0.05 | 0.08 |
| 3.5-4.0 | + 0.04 / - 0.05 | 0.09 |
| 4.1-6.0 | + 0.05 / - 0.05 | 0.10 |
| Chemical composition:(%) |
| AISI material | 304 | 304L | 304HC | 316 | 316L | 310S | 321 | 301 | 302 |
| C | <0.08 | <0.03 | <0.06 | <0.08 | <0.03 | <0.08 | <0.08 | <0.15 | <0.15 |
| Si | <1.0 | <1.0 | <1.0 | <1.0 | <1.0 | <1.5 | <1.0 | <1.0 | <1.0 |
| Mn | <2.0 | <2.0 | <2.0 | <2.0 | <2.0 | <2.0 | <2.0 | <2.0 | <2.0 |
| P | <0.035 | <0.04 | <0.035 | <0.04 | <0.04 | <0.04 | <0.045 | <0.04 | <0.04 |
| S | <0.03 | <0.03 | <0.03 | <0.03 | <0.03 | <0.03 | <0.03 | <0.03 | <0.03 |
| Ni | 8~10 | 9~13 | 8~11 | 10~14 | 12~15 | 19~22 | 9~13 | >7 | >8 |
| Cr | 17~1 | 18~20 | 17~19 | 16~18 | 16~18 | 24~26 | 17~19 | 16~18 | 17~19 |
| Mo | - | - | - | 2.0~3.0 | 2.0~3.0 | - | - | - | - |
| Cu | - | - | 2.0-3.0 | - | - | - | - | - | - |
| Ti | - | - | - | - | - | - | - | - | - |
