Audited Supplier
High Temperature Resistant Stainless Steel forced draft boiler fan
Industrial boiler is one of the most popular application areas for SIMO BLOWER'S products. SIMO BLOWER can provide full sets of boiler fans products, can meet 1~450T of coal fired boiler, biomass boiler, waste incineration boiler and other industrial boiler systems' performance requirements.SIMO BLOWER is available for sale to the users of industrial boiler fan including: Coal-fired boiler fan,Biomass fuel boiler fan,Waste incineration boiler fans, which is used to industrial boiler forced draft fan(FD Fan), induced draft fan (ID Fan),primary air fan (PA Fan),secondary air fan ( SA Fan ) , as well as flue gas dust removing fan, flue gas desulfurization fan(FGD Fan), flue gas denitrification fan and so on.
1.It can output higher outlet pressure and provide more gas flow at the same time, low noise.
2. The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the highest efficiency point and reduce energy waste.
3. Motor slide guide can be provided for convenient belt tensioning to reduce energy loss caused by belt slack.
4. The bearing housing is reserved for the installation position of temperature and vibration sensors, which can facilitate the installation of fan operation monitoring device.
5. Use liquid lubricating oil. It is not necessary to open the bearing housing to replace and fill the lubricating oil. The bearing housing is provided with an observation window for easy observation of the quality and stock of the lubricating oil.
6. The bearing housing uses labyrinth mechanical seal, unique anti-leakage design inside, vent hole at the top, and sealing grease at the joint, completely eliminating the possibility of oil leakage in the bearing hosing.
7. After annealed treatment, the internal stress of the structure generated during welding can be completely eliminated to ensure that the impeller will not creepage and crack.
8. The impeller is subjected to a high standard of dynamic balancing adjusting to ensure stable operation of the fan.
9. After running test and vibration value detection, the operation is reliable.
| Series | Model | Rotation Speed (r/min) | Total Pressure (Pa) | Air Capacity (m³/h) | Power (kW) |
| 5-05 | 2.5A~6.5A | 1420~2825 | 907~1313 | 599~11053 | 0.75~5.5 |
| 4C~10C | 1600~2900 | 1232~3867 | 3007~44413 | 3~45 | |
| 8D~12.4D | 1450 | 1989~4051 | 12028~76740 | 15~90 | |
| 5-06 | 8F~31.5F | 480~1450 | 1358~9828 | 9890~709000 | 15~2000 |
| 5-11 | 4C~9C | 1740~2900 | 990~3197 | 2750~36140 | 3~37 |
| 12D~12.4D | 1450 | 2471~3903 | 37100~75330 | 75~90 | |
| 5-12 | 4C~12.5C | 1000~3550 | 742~4234 | 2065~67803 | 2.2~110 |
| 6-03 | 5A | 2900 | 4393~3217 | 2240~4776 | 7.5 |
| 6C~9C | 1500~2400 | 187~5482 | 2403~17300 | 4~37 | |
| 6-04 | 12D~20D | 1450 | 3581~14867 | 14800~163000 | 55~800 |
| 6-05 | 2.5A~8.5A | 1420~2825 | 451~3391 | 403~18137 | 0.55~18.5 |
| 3.55C~10C | 1600~3450 | 588~3338 | 841~32144 | 1.5~37 | |
| 11.2D | 1480 | 2764~4086 | 21578~41773 | 45~55 | |
| 6-06 | 8F~31.5F | 480~1450 | 1903~10628 | 9900~776000 | 18.5~2500 |
| 8D~29.5D | 480~1450 | 1859~10980 | 11000~667000 | 15~2000 | |
| 6-09 | 6.3A | 1460 | 1800~1407 | 4116~7464 | 5.5 |
| 6-11 | 14D~20D | 1450 | 5435~14461 | 22889~121114 | 90~630 |
| 6-12 | 3.15C~12.5C | 400~3150 | 344~2043 | 755~56902 | 0.75~22 |
