Audited Supplier
HLM
Powder Coating
Black
Powder
Spray
Resin
Silicon Based
ISO14001, RoHS, ISO9001, SGS, Reach
Iron
6 Months
Conversion Type
PE Bags Inside
200 Centi Degrees/20mins
80um
1500h Δe≤4
>=2h
HLM
Carton Box
40*30*40
China
Product Description
Product Description
Fluorocarbon weathering powder coating
PVDF fluorine resin is vinylidene fluoride homopolymer, a semi-crystalline fluoropolymer, chemical structure with fluorocarbon bonding, this structure with short bond properties and hydrogen ions to form the most stable and firm combination; is a high molecular weight thermoplastic plastic processing, with 70% PVDF resin fluorocarbon coating by spraying or roll coating process of baking film, with incomparable super weather resistance and processing process, service life of more than 20 years, so it is the high-rise buildings or in the extreme harsh environment of metal surface treatment coating.
PROPERTIES
Super weather resistance and Environmental,no emission and recyclable
chemical resistance properties.
Non-toxic and safe:food grade. Good in mechanical and physical properties.
OPERATING PARAMETERS
l Pre-treatment
Spraying requirements
Cured condtions:20 mins. at 230ºC metal temperature Cured Film Thickness:80um.
Storage Stability
Keep storage environment well-ventilated and dry, with temperatures not exceeding 27°C.
PVDF fluorine resin is vinylidene fluoride homopolymer, a semi-crystalline fluoropolymer, chemical structure with fluorocarbon bonding, this structure with short bond properties and hydrogen ions to form the most stable and firm combination; is a high molecular weight thermoplastic plastic processing, with 70% PVDF resin fluorocarbon coating by spraying or roll coating process of baking film, with incomparable super weather resistance and processing process, service life of more than 20 years, so it is the high-rise buildings or in the extreme harsh environment of metal surface treatment coating.
PROPERTIES
Super weather resistance and Environmental,no emission and recyclable
chemical resistance properties.
Non-toxic and safe:food grade. Good in mechanical and physical properties.
OPERATING PARAMETERS
l Pre-treatment
| Pre-treatment | |
| Pre-treatment | Degreasing, rust removal, sandblasting,phosphating, silane treatment, or ceramic coating, etc. |
| Attention | Before spraying, please ensure that the substrate is thoroughly degreased and rust-free, with no impurities, water stains, or residual liquid. |
| Note | Acid washing and sandblasting the substrate can enhance the adhesion between the coating and the substrate. |
Spraying requirements
Cured condtions:20 mins. at 230ºC metal temperature Cured Film Thickness:80um.
Storage Stability
Keep storage environment well-ventilated and dry, with temperatures not exceeding 27°C.
Technical data sheet
