Audited Supplier
Lx-Hdj1313A
Electronics, Filter Electronic Components
Silver: 76%
7440-22-4
Silver Gray
Paste
79.2+-2.0%
Longxin
5g Filter Silver Paste
Guangdong, China
Industrial Grade, Electron Grade
Lx-Hdj1313A
Longxin
Carton
1kg/can
China
Product Description
Model | LX-HDJ1313A |
Solid content% | 79.2±2.0 |
Viscosity (dPa.s) | 30000±5000 |
Finenessμm | ≤5 |
Volume resistivityΩ·cm | ≤3*10-6 |
At this time, we are working diligently to expand our shipping solutions to accommodate your selected quantity. Please stay tuned for updates on new options designed to deliver excellence and convenience.
Protections for this product include cutting-edge security measures. Secure payments are guaranteed with advanced SSL encryption and PCI DSS data protection protocols. Enjoy peace of mind with easy return & refund policies covering order discrepancies or product issues, and benefit from free local returns on qualifying defective purchases. Rest assured, protects every order placed and paid for on the platform with comprehensive safeguards.
Foshan Longxin New Material Co., Ltd.: Established as a beacon of innovation, our company is at the forefront of introducing groundbreaking materials designed to meet the dynamic needs of modern technology. Partner with us to access a world of possibilities and cutting-edge solutions.
Q: How many days is the price valid for?
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
