Audited Supplier
Lx-Hdj1207
Electronics, Piezoelectric Ceramic
Silver: 63%
7440-22-4
Silver Gray
Paste
70+-2.0%
Longxin
Piezoelectric Ceramic Silver Paste
Guangdong, China
Industrial Grade, Electron Grade
Piezoelectric Ceramic
Lx-Hdj1207
Longxin
Carton
1kg/can
China
Product Description
Price per gram: Purchase with confidence knowing our competitive pricing: 100 - 499 grams: $0.91, 500 - 999 grams: $0.89, and for quantities >= 1000 grams: enjoy a rate of $0.86.
Model | LX-HDJ1207 |
Solid content% | 70±2.0 |
Viscosity (dPa.s) | 550±50 |
Finenessμm | ≤10 |
Resistivity(Ω.cm) | ≤2.5*10-6 |
Applicability | Piezoelectric ceramic |
Please note: Shipping solutions for the selected quantity are currently unavailable. For further assistance, contact our support team to discuss alternative options and arrangements.
Protections for this product: Enjoy peace of mind with our stringent security measures. Secure payments: Each transaction on is protected by advanced SSL encryption and PCI DSS data protection protocols. Easy Return & Refund: Effortlessly claim refunds for missing items or product issues, with free local returns for defects on qualifying purchases.
Enjoy full protection for all your orders placed and paid through . Our platform safeguards your investments, ensuring a smooth and secure purchasing experience.
Foshan Longxin New Material Co., Ltd.
Q: How many days is the price valid for?
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
