Audited Supplier
The FRP fiberglass cable conduit developed and produced by our company is reinforced with high-strength fiberglass, and is formed through winding, high-temperature curing, and composite molding.
Features: High ring stiffness, high tensile strength, high and low temperature resistance, corrosion resistance and waterproofing, strong flame retardancy, smooth inner wall, easy to transport and install, safe and environmentally friendly,long service life.
| No. | Name | Model | Pipe outside diameters(mm) | Thickness(mm) | Weight(kg/m) |
| 1 | DN110 | φ-110x3 | 116 | 3 | 2.13 |
| 2 | DN150 | φ-150x4 | 158 | 4 | 3.84 |
| 3 | DN200 | φ-200x5 | 210 | 5 | 6.43 |
,FRP Pultrusion production is a continous production process to produce fiberglass reinforcedpolymer proflesof any length and contstant section.Reinforce-ment fibers may be roving,con.tinous mat,woven robing,carbonor others. The fibers are impregnated with polymer matrix(resin,minerals,pigments,additives) and passedthrough a pre-foming station that producesthe stratifcation necessary to give the profle the desiredproperties.After the pre-formingstep,the resin-impregnated fibers are pulled through a heated die topolymerize the resin.
1. Are you a manufacturer?
Yes, we are a manufacturer, welcome to visit our factory!
2. What's FRP?
Fiber Reinforced Polymer (FRP) is a composite material made of a polymer matrix reinforced with fibers. The fibres are usually glass, carbon, aramid, or basalt. Rarely, other fibres such as paper or wood or asbestos have been used. The polymer is usually an epoxy, vinylester or polyester thermosetting plastic, and formaldehyde resins are still in use. FRP are commonly used in the aerospace, automotive, marine, construction industries and ballistic armor.
If you already have your own design drawings, it will take up to 15 working days for our company to make the mold based on your design drawings and produce the first sample; If you do not have your own design drawings, our company can provide you with a maximum of 2 working days for the first drawing and a maximum of 25 working days for the first sample according to your requirements
