Audited Supplier
8081
25852-47-5
Mixture
3506100090
Instant Adhesive
Water-Soluble
Automobile, Construction, Woodworking, Footwear & Leather, Fiber & Garment, Packing
Inorganic Polymer
Room Curing
Inorganic Adhesive Material
High-Temp Resistant
Modified Components
Inorganic Material
Khaki
2 Years
Yes
Yes
Paper Carton
100g, 420g, 1.5kg
Xiangyang
3506100090
Product Description
SL8081 High Temperature Pipe Sealant for Steam Turbines
Product Introduction:
One component high temperature sealant, it's made of inorganic high molecular polymer and other modified components. It will cure and form an insoluble inorganic polymer on the joint surface in high temperature. It has good resistance to organic solvents, gasoline, jet fuel, petroleum based synthetic hydraulic oil, lubricating oil, freon, natural gas, high temperature gas, hydrogen, oxygen, ammonia, carbon dioxide and other media. It has the advantages of high pressure resistance, good coating process, non combustible and easy disassembly. Its working temperature ranges from - 100 ºC to + 1200 ºC, and instantaneous temperature resistance is + 1300 ºC. Performance is equivalent to Copaltite 5oz high temperature sealant.
Product Pictures:
Product Application:
It is suitable for the normal temperature or high temperature detachable sealing in automobile, tractor, engineering machinery, petrochemical equipment, flange shell of high temperature furnace, valve, gearbox, intake and exhaust pipe, pipe thread joint. It prevents oil leakage, air leakage and water leakage. It can also be used for high temperature resistant thread and pin sealing, and can also fill the small cracks in the mold.
Product Introduction:
One component high temperature sealant, it's made of inorganic high molecular polymer and other modified components. It will cure and form an insoluble inorganic polymer on the joint surface in high temperature. It has good resistance to organic solvents, gasoline, jet fuel, petroleum based synthetic hydraulic oil, lubricating oil, freon, natural gas, high temperature gas, hydrogen, oxygen, ammonia, carbon dioxide and other media. It has the advantages of high pressure resistance, good coating process, non combustible and easy disassembly. Its working temperature ranges from - 100 ºC to + 1200 ºC, and instantaneous temperature resistance is + 1300 ºC. Performance is equivalent to Copaltite 5oz high temperature sealant.
Product Pictures:
Product Application:
It is suitable for the normal temperature or high temperature detachable sealing in automobile, tractor, engineering machinery, petrochemical equipment, flange shell of high temperature furnace, valve, gearbox, intake and exhaust pipe, pipe thread joint. It prevents oil leakage, air leakage and water leakage. It can also be used for high temperature resistant thread and pin sealing, and can also fill the small cracks in the mold.
Physical Properties:
How to Use:
1, The joint surface to be sealed shall be clean, dry and free of oil stain. Use acetone or gasoline to remove oil
2, Use scraper or other suitable tools to evenly apply the sealant on the joint surface that has been degreased, and immediately assemble and fasten it. Use brush to apply the sealant on the screw, sealant amount shall be 3-4 threads.
3, This product is difficult to cure fully at room temperature, but it can be applied on parts joint surface at room temperature. It will be cured at high temperature when the parts are working. The pressure test shall be conducted after the sealant is completely cured. Uncured excess glue or glue smeared on tools or clothes can be wiped with clean cloth dipped in water.
4, When disassembling, after removing the bolt, knock the joint surface of the part with a cork hammer to loosen it. The solidified sealant on the joint surface can be scraped off with a copper scraper or a copper brush and other tools with appropriate hardness.
Package:
100g/bottle, 420g/tube, 1.5kg/barrel
| Appearance: | before curing: khaki paste after curing: khaki hard solid |
| Density: | 1.65~1.75g/cm³ at 20ºC |
| Nonvolatile matter: | ≥50% |
| Fineness: | ≤ 9μm |
| Flowability: | ≤64mm |
| Adhesion: | good |
| Medium resistance, weight change: | 1.7≤±5% in Aviation kerosene No.2, aviation gasoline No.75 and aviation lubricating oil No.20 |
| Pressure resistance: | 23ºC ≥8.8 MPa; 150ºC ≥6.86 MPa; 200ºC ≥6.86 MPa |
| Corrosivity: | no corrosion to stainless steel, steel and nickel base superalloy |
| Curing condition: | 120min at 100ºC |
| Filling gap: | ≤0.6mm(best fill gap is≤0.2mm ) |
How to Use:
1, The joint surface to be sealed shall be clean, dry and free of oil stain. Use acetone or gasoline to remove oil
2, Use scraper or other suitable tools to evenly apply the sealant on the joint surface that has been degreased, and immediately assemble and fasten it. Use brush to apply the sealant on the screw, sealant amount shall be 3-4 threads.
3, This product is difficult to cure fully at room temperature, but it can be applied on parts joint surface at room temperature. It will be cured at high temperature when the parts are working. The pressure test shall be conducted after the sealant is completely cured. Uncured excess glue or glue smeared on tools or clothes can be wiped with clean cloth dipped in water.
4, When disassembling, after removing the bolt, knock the joint surface of the part with a cork hammer to loosen it. The solidified sealant on the joint surface can be scraped off with a copper scraper or a copper brush and other tools with appropriate hardness.
Package:
100g/bottle, 420g/tube, 1.5kg/barrel
