Audited Supplier
YUANXIAN HIGH-TECH MATERIAL
1X2 & 1X3 PC Strand
2 wire and 3 wire pc strand consist of two wires or three wires of the same nominal diameter, spun together in helical form over a theoretical common axis.
It is uncoated steel strand, general for use in pretensioned and posttensioned prestressed concrete construction.
ADVANTAGES
-Primary advantages
High Tensile Strength, full specifications from 2x2.25 to 3x6.00.
Qualified Quality, precision single wire diameter control
Strand Lay Length could be as per customer's requirement.
Package can be as per clients' requirement.
-Why should I buy this 1x2 and 1x3 prestressed steel strand ?
Package dimension can be as per clients' requirement.
Within the range of standard, mainly the requirement of weight per meter and lay length, we can manufacture as per clients' specific strand lay length, which can make the stand have a longer length per meter.
-What makes this product different to other factory's 1x3 prestressed steel strand?
Single wire diameter is controlled more precisely than other factory.
USE
-Where can our 1x3 and 1x2 prestressed steel strand be used?
Our products can be used in manufacturing T/I beam, Slab, pile, poles, sleepers
SPECIFICATIONS
| Structure | Standard | Nominal diameter | Wire Diameter | Tolerance on Strand Diameter | Nominal Area of Section | Weight of strand | Tensile Strength, Rm | Minimum Breaking load,Fm | 0,2% proof force e, Fp0.2 | 0,1% proof force , Fp0.1 | Minimum Load at 1 % Extension, Fp1.0 | Elongation Lo=500mm, Agt | Curvative of strand | Lay Length |
| mm | mm | mm | (mm2) | (kg/1000m) | (N/mm2) | KN | KN | % | mm | mm | ||||
| 1X2 | GB/T5224:2014 | 5.00 | 2.50 | +0.15,-0.05 | 9.82 | 77.1 | 1860 | 18.3 | 16.5 | 3.5 | 25mm | (12-16)d | ||
| 1X2 | GB/T5224:2014 | 5.00 | 2.50 | +0.15,-0.05 | 9.82 | 77.1 | 1960 | 19.2 | 17.3 | 3.5 | 25mm | (12-16)d | ||
| 1X2 | GB/T5224:2014 | 5.80 | 2.90 | +0.15,-0.05 | 13.20 | 104.0 | 1860 | 24.6 | 22.1 | 3.5 | 25mm | (12-16)d | ||
| 1X2 | GB/T5224:2014 | 5.80 | 2.90 | +0.15,-0.05 | 13.20 | 104.0 | 1960 | 25.9 | 23.3 | 3.5 | 25mm | (12-16)d | ||
| 1X2 | GB/T5224:2014 | 8.00 | 4.00 | +0.25,-0.10 | 25.10 | 197.0 | I860 | 46.7 | 42.0 | 3.5 | 25mm | (12-16)d | ||
| 1X2 | GB/T5224:2014 | 8.00 | 4.00 | +0.25,-0.10 | 25.10 | 197.0 | 1960 | 49.2 | 44.3 | 3.5 | 25mm | (12-16)d | ||
| 1X2 | GB/T5224:2014 | 10.00 | 5.00 | +0.25,-0.10 | 39.30 | 309.0 | 1860 | 73.1 | 65.8 | 3.5 | 25mm | (12-16)d | ||
| 1X2 | GB/T5224:2014 | 10.00 | 5.00 | +0.25,-0.10 | 39.30 | 309.0 | 1960 | 77.0 | 69.3 | 3.5 | 25mm | (12-16)d | ||
| 1X2 | GB/T5224:2014 | 12.00 | 6.00 | +0.25,-0.10 | 56.50 | 444.0 | 1860 | 105.0 | 94.5 | 3.5 | 25mm | (12-16)d | ||
| 1X3 | GB/T5224:2014 | 6.20 | 2.90 | +0.15,-0.05 | 19.80 | 155.0 | 1860 | 36.8 | 33.1 | 3.5 | 25mm | (12-16)d | ||
| 1X3 | GB/T5224:2014 | 6.20 | 2.90 | +0.15,-0.05 | 19.80 | 155.0 | 1960 | 38.8 | 34.9 | 3.5 | 25mm | (12-16)d | ||
| 1X3 | GB/T5224:2014 | 6.50 | 3.00 | +0.15,-0.05 | 21.20 | 166.0 | 1860 | 39.4 | 35.5 | 3.5 | 25mm | (12-16)d | ||
| 1X3 | GB/T5224:2014 | 6.50 | 3.00 | +0.15,-0.05 | 21.20 | 166.0 | 1960 | 41.6 | 37.4 | 3.5 | 25mm | (12-16)d | ||
| 1X3 | GB/T5224:2014 | 8.60 | 4.00 | +0.20.-0.10 | 37.70 | 296.0 | I860 | 70.1 | 63.I | 3.5 | 25mm | (12-16)d | ||
| 1X3 | GB/T5224:2014 | 8.60 | 4.00 | +0.20.-0.10 | 37.70 | 296.0 | 1960 | 73,9 | 66.5 | 3.5 | 25mm | (12-16)d | ||
| 1X3 | GB/T5224:2014 | 8. 74 | 4.05 | +0.20.-0.10 | 38.60 | 303.0 | 1860 | 71.8 | 64.6 | 3.5 | 25mm | (12-16)d | ||
| 1X3 | GB/T5224:2014 | 10.80 | 5.00 | +0.20.-0.10 | 58.90 | 462.0 | 1860 | 110.0 | 99.0 | 3.5 | 25mm | (12-16)d | ||
| 1X3 | GB/T5224:2014 | 10.80 | 5.00 | +0.20.-0.10 | 58.90 | 462.0 | 1960 | 115.0 | 104.0 | 3.5 | 25mm | (12-16)d | ||
| 1X3 | GB/T5224:2014 | 12. 90 | 6.00 | +0.20.-0.10 | 84.80 | 666.0 | 1860 | 158.0 | 142.0 | 3.5 | 25mm | (12-16)d | ||
| 1X3 | GB/T5224:2014 | 12. 90 | 6.00 | +0.20.-0.10 | 84.80 | 666.0 | 1960 | 166.0 | 149.0 | 3.5 | 25mm | (12-16)d | ||
| 1X3I | GB/T5224:2014 | 8. 74 | 4.05 | +0.20.-0.10 | 38.60 | 303.0 | 1860 | 71.8 | 64.6 | 3.5 | 25mm | (12-16)d | ||
| 1X2 | pr EN10138 | 4.5 | 2.25 | 7.95 | 62.1 | 1860 | 14.8 | 13.0 | 3.5 | 25mm | (14-22)d | |||
| 1X3 | pr EN10138 | 4.85 | 2.25 | 11.90 | 92.9 | 1860 | 22.1 | 19.4 | 3.5 | 25mm | (14-22)d | |||
| 1X3 | pr EN10138 | 6.5 | 3.00 | 21.20 | 165.6 | 1860 | 39.4 | 34.7 | 3.5 | 25mm | (14-22)d | |||
| 1X3 | pr EN10138 | 6.9 | 3.25 | 23.40 | 182.8 | 1860 | 43.5 | 38.3 | 3.5 | 25mm | (14-22)d | |||
| 1X3 | pr EN10138 | 7.5 | 3.50 | 29.00 | 226.5 | 1860 | 53.9 | 47.4 | 3.5 | 25mm | (14-22)d | |||
| 1X3 | pr EN10138 | 8.6 | 4.00 | 37.40 | 292.1 | 1860 | 69.6 | 61.2 | 3.5 | 25mm | (14-22)d | |||
| 1X3 | pr EN10138 | 6.3 | 2.90 | 19.80 | 154.6 | 1920 | 38.0 | 33.4 | 3.5 | 25mm | (14-22)d | |||
| 1X3 | pr EN10138 | 6.5 | 3.00 | 21.20 | 165.6 | 1920 | 40.7 | 35.8 | 3.5 | 25mm | (14-22)d | |||
| 1X3 | pr EN10138 | 4.8 | 2.25 | 12.00 | 93.7 | 1960 | 23.5 | 20.9 | 3.5 | 25mm | (14-22)d | |||
| 1X3 | pr EN10138 | 5.2 | 2.40 | 13.60 | 106.2 | 1960 | 26.7 | 23.8 | 3.5 | 25mm | (14-22)d | |||
| 1X3 | pr EN10138 | 6.5 | 3.00 | 21.20 | 165.5 | 1960 | 41.6 | 37.0 | 3.5 | 25mm | (14-22)d | |||
| 1X3 | pr EN10138 | 6.85 | 3.25 | 23.60 | 184.3 | 1960 | 46.3 | 41.2 | 3.5 | 25mm | (14-22)d | |||
| 1X3 | pr EN10138 | 5.2 | 2.40 | 13.60 | 106.2 | 2060 | 28.0 | 24.9 | 3.5 | 25mm | (14-22)d | |||
| 1X3 | pr EN10138 | 5.2 | 2.40 | 13.60 | 106.2 | 2160 | 29.4 | 26.2 | 3.5 | 25mm | (14-22)d | |||
| 1X2 | ASTM A910 | 5.8 | 2.9 | +0.66.-0.15 | 13.20 | 104.0 | 1860 | 24.0 | 21.6 | 3.5 | (12-16)d | |||
| 1X3 | ASTM A910 | 4.8 | 2.25 | +0.66.-0.15 | 12.00 | 94.2 | 1860 | 22.8 | 20.5 | 3.5 | (12-16)d | |||
| 1X3 | ASTM A910 | 5.2 | 2.40 | +0.66.-0.15 | 13.60 | 107.0 | 1860 | 25.2 | 22.7 | 3.5 | (12-16)d | |||
| 1X3 | ASTM A910 | 6.2 | 2.90 | +0.66.-0.15 | 19.80 | 155.0 | 1860 | 37.2 | 33.5 | 3.5 | (12-16)d | |||
| 1X3 | ASTM A910 | 6.5 | 3.00 | +0.66.-0.15 | 21.30 | 167.0 | 1860 | 39.6 | 36.0 | 3.5 | (12-16)d | |||
| 1X3 | ASTM A910 | 7.5 | 3.50 | +0.66.-0.15 | 29.00 | 228.0 | 1860 | 54.0 | 45.0 | 3.5 | (12-16)d | |||
| 1X3 | ASTM A910 | 8.6 | 4.00 | +0.66.-0.15 | 37.40 | 298.4 | 1860 | 69.7 | 62.7 | 3.5 | (12-16)d | |||
| 1X2 | JIS3536 | 5.8 | 2.9 | +0.03.-0.03 | 13.21 | 104.0 | 1860 | 25.5 | 22.6 | (12-16)d | ||||
| 1X3 | JIS3536 | 6.2 | 2.9 | +0.03.-0.03 | 19.82 | 156.0 | 1860 | 38.2 | 33.8 | (12-16)d |
Certification
Q1: What is your MOQ?
A: Usually our MOQ is one container, but it is different for some items, please contact us for details.Q2:What is your terms of payment?
A:We usually accept T/T at sight, L/C. If you prefer other payments terms, please discuss.
Q3:What is your delivery time?
A:For products in stock, we can ship it within 7 days after receiving the deposit. For custom order, production time is 15-30 workdays after received the deposit.
Q4:How could you guarantee your products?
A:Mill Test Certification is supplied with shipment, We also accept and support the third-party inspection.
Q5: Will all costs be clear?
A:Our quotation is easy to understand and will not incur any additional costs.
