Audited Supplier
Flow range: 0.3-100m2/h
Lift range: ~120m
Design pressure: 2.5MPa
Application temperature: -40~+180ºC
Application field: Transport neutral or corrosive medium, clean or wear medium, gas contained medium or medium which can easily generate bubbles, high viscosity or low viscosity medium. Mainly used in industries of petroleum, chemical industry, food, papermaking, spinning, metallurgy and pharmacy etc.
General
For pumping neutral or corrosive liquids, uncontaminated or abrasive liquids, liquids containing gases or which tend to froth, and liquids of high or low viscosity, including liquids containing fibrous and solid material.
Principal fields of application
Food industry, Texil mill, paper-making, Petro-industry, Chemical industry. Ship building, Build industry. Nuclear indu-stry, Metallurgical and mine etc.
Operation
The mono pump is a screw pump sealed on the inside gearing, belong to rotor displacement pump. The essential part consists of combination of a stator with two - start female thread and a rotor in planetary motion by the universal coup-ling, between the stator and the rotor, being in mesh continually, formed many spaces, as the close spaces unchanged in volume are axial moving, the medium handled is transmited to the outlet port from the inlet port. The liquid transmit-ed to get not confused or disruptive, thus it is most suitable for lifting mediums containing solid matter, abrasive partic-les and viscous liquids.
| 1 | Out of the mouth | 2 | Stator | 3 | Link sels of weat-resst | 4 | Link | 5 | Suction chamber | 6 | Short wear set |
| 7 | Stuffing box | 8 | Packing gland | 9 | Bearing | 10 | Shaft | 11 | Screw | 12 | Pin |
| 13 | Blocking pin |
Performance parameters of the table
