Audited Supplier
(H)RW12-12
High
Expulsion Drop-out
High Voltage
FF
Fuse Holder
Kema/IEC/ANSI/IEEE
10-38kv
12kv
Not Less Than 300 (D-Level)mm
50Hz
12.5/16ka
500times
DGG
Export Carton
China
Product Description
DGG High Voltage Prcelain/Ceramics Drop Out Fuse Cutout
Technical Parameter
Outline And Installation Dimension
Model And Meanings
A:We are a factory with over 20 years of production experience, supporting both OEM and ODM modes for customized production for customers.
3.Q:What is the minimum order quantity for your company?
A:Our company's minimum order quantity is greater than or equal to 1 unit.
4.Q:How can I get to your company?
A:Our company's address is No. 268 Weiqi Road, Leqing Economic Development Zone, Leqing City, Wenzhou City, Zhejiang Province.You can take a plane to Wenzhou Longwan International Airport or take the high-speed rail to Yueqing Station.
5.Q:How many ways of shipping ?
A:By sea(cheapest ,but slow); by express(DHL,FedEx,UPS...) ; by air
6.Q:What's the sample time and production time ?
A:Sample(in stock):10-15 days Production time :30-50 days .
7.Q:How to get a sample ?
A:Some samples can be provided for free. If you can confirm that there will be a large order to purchase from our company, then you only need to pay for the shipping fee; Customized samples, please contact us for sample fees.
We are professional manufacturer of Dropout Fuse Cutout, current transformer ,voltage transformer, Vacuum Circuit Breakers/Recloser,Isolation switches,Lightning Arresters,High and Low Voltage Cabinets,Metering Devices,Power Distribution Transformers etc.
We can customize production based on customer drawings, and all products come with testing reports and certificates. Among them, the Drop out fuse cutout have been certified by KEMA Labs.
We can customize production based on customer drawings, and all products come with testing reports and certificates. Among them, the Drop out fuse cutout have been certified by KEMA Labs.
(H) RW12-12 (F) outdoor high voltage AC drop fuse (hereinafter referred to as "fuse") is applicable to the outdoor overhead distribution systems with a rated frequency of 50Hz and rated voltage of 10kV. It is used as a protective element of circuit or electrical equipment in case of overload or short circuit fault of a power system. When traveling normally, the fuse is connected in series in the power line, the fuse is in a tensioned state, and the movable joint is locked. When the line fails, the fault current causes the fuse to blow, the movable joint is released, the fuse tube is quickly dropped, and the circuit is cut off, which plays a role in safety protection for the maintenance of the line and equipment. The load type fuse is added with elastic contact and arc extinguishing cover on the basis of the ordinary type, which is used to open and close the load current in the power system.
The fuse shall comply with technical standards such as GB / T 15166.3 - 2008 high voltage AC fuses - Part 3: injection fuses, DL / T 640 - 1997 outdoor AC high voltage drop tested fuses and fuse links ordering technical conditions.
The fuse shall comply with technical standards such as GB / T 15166.3 - 2008 high voltage AC fuses - Part 3: injection fuses, DL / T 640 - 1997 outdoor AC high voltage drop tested fuses and fuse links ordering technical conditions.
Technical Parameter
| No. | Item | Unit | Technical parameter | ||
| 1 | Rated frequency | Hz | 50 | ||
| 2 | Rated voltage | kV | 12 | ||
| 3 | Rated current of the same family of fuse components | A | ≤100 | ≤200 | |
| 4 | Rated breaking current | kA | 12.5 | 16 | |
| 5 | Rated short-term power frequency withstand voltage | To ground (dry/wet test) | kV/min | 42/1 | |
| Fracture surface (dry/wet test) | 48/1 | ||||
| 6 | Lightning impulse withstand voltage | To the ground | kV | 75 | |
| Fracture | 85 | ||||
| 7 | Creepage distance | mm | ≥372(E-level anti fouling) | ||
| 8 | Mechanical lifespan | Times | 500 | ||
| 9 | Service life | Year | ≥20 | ||
| Note:If the altitude is higher than 1000m,the rated insulation level should be adjusted accordingly. | |||||
Outline And Installation Dimension
Model And Meanings
- The insulator adopts high-strength porcelain or imported silicone rubber insulation material with excellent insulation performance;
- The fuse tube is made of epoxy phenolic glass cloth tube with fiber lining with anti-ultraviolet special coating, which has excellent anti-ultraviolet performance
- The rated current of the same family of fuses is large, up to 200A, and the breaking capacity is strong, up to 16kA.
We have test reports for drop out fuse cutout products that have been validated by KEMA Laboratory,And we also have ISO certificates.
Our company's products are exported to various parts of the world, mainly to countries such as Ghana, Gambia, Ethiopia, Philippines, South Korea, Bangladesh, Australia, Pakistan, Azerbaijan, Myanmar, etc. The quality and performance of the product have been praised by customers, and there have been no complaints from customers for so many years.
Our team designs the most cost-effective power solutions for our clients, and has participated in the design of their substation and distribution plans as well as overseas bidding. Successfully solved the problem of product requirements for customers.
Our team designs the most cost-effective power solutions for our clients, and has participated in the design of their substation and distribution plans as well as overseas bidding. Successfully solved the problem of product requirements for customers.
1.Q:Can you print my logo&design?
A:Yes we can print your logo , please send us your logo picture&artwork ,and have all texts outlined .Also please let us know printing size,color,method and position of the logo.
A:We are a factory with over 20 years of production experience, supporting both OEM and ODM modes for customized production for customers.
3.Q:What is the minimum order quantity for your company?
A:Our company's minimum order quantity is greater than or equal to 1 unit.
4.Q:How can I get to your company?
A:Our company's address is No. 268 Weiqi Road, Leqing Economic Development Zone, Leqing City, Wenzhou City, Zhejiang Province.You can take a plane to Wenzhou Longwan International Airport or take the high-speed rail to Yueqing Station.
5.Q:How many ways of shipping ?
A:By sea(cheapest ,but slow); by express(DHL,FedEx,UPS...) ; by air
6.Q:What's the sample time and production time ?
A:Sample(in stock):10-15 days Production time :30-50 days .
7.Q:How to get a sample ?
A:Some samples can be provided for free. If you can confirm that there will be a large order to purchase from our company, then you only need to pay for the shipping fee; Customized samples, please contact us for sample fees.
