Audited Supplier
KR-BAK-A83S
Equipment Installation, Debugging, and Training
12 Months
Vacuum Pump,Program Operation
Heating Plate, Circulating Flow Heating
Convective
Powder, Solution, Cream, Bulk
Inactive Gas
Continuous
Continuous Vacuum
Vacuum Drying Oven
Quickly Remove Moisture From Battery Cells, Electr
Box Mechanism: Single-Layer Single Door, Flexible
5.0 Thickness, SUS304 Stainless Steel
High Density Aluminum Silicate Insulation Cotton
High Temperature Resistant Sealing Ring
PLC Automatic Program Control
Electric Heating Control
Room Temperature+10-120 Degrees Can Be Set
+/- 3 Degrees
85 Degree Within 30 Min
10 Paz
Less Than +/-15 Degree at Woking 85 Degree
Circulating Cold Water Cooling System
30kw
Career
Wood Case
1600mm x 1100mm x 1400mm
China
8514390090
Product Description
Product description
Equipment Capicity
| Usage | Quickly eliminate moisture from battery cells, electrodes, and coils, saving more time and energy consumption. |
| Box structure | Single layer, single door(1 door),aluminum alloy sealed door,flexible automatic adjustment, thermal storage and explosion-proof functions |
| External dimension | 2150mm x 1600mm x 2250mm (Height x Width x Depth) |
| Effective size of inner liner | 1600mm x 1100mm x 1400mm (Height x Width x Depth) |
| Inner liner material | 5.0 Thickness SUS304 stainless steel |
| Insulation layer | High density aluminum phosphate insulation cotton |
| Sealing ring | High temperature resistant sealing ring |
Control method | PLC automatic program control, 7-inch color display screen human-machine operation, centralized control of automation program. 1. The equipment is equipped with manual/automatic switching function. When in manual mode, heating, vacuuming, nitrogen filling, and cooling functions can be performed separately 3. When in automatic mode, press the auto start button to operate according to the set process parameters [(vacuum pumping - nitrogen filling - temperature rise and heating - vacuum baking (vacuum pumping/nitrogen filling achieve automatic gas exchange alternating cycle process) cooling (nitrogen filling) - end of operation (vacuum holding and sound and light alarm)] |
Heating method | 1. Electric heating control with magnetic fluid hot air turbulence device 2. Heating tube positions: bottom, left, right, rear four surfaces for heating |
| Constant temperature range | Room temperature+10 ºC~120 ºC can be set |
| Inner liner temperature error | ± 3 ºC (empty container, normal pressure, constant temperature state) |
| Display temperature error | ±0.1ºC |
| Heating time | 85 ºC within 30 minutes, Internal uniformity ≤ 1.5 hours (no load) |
| Vacuum degree | Air leakage(within 24 hours) ≤ 500pa (no load) |
Equipment Capicity
| Item | Capacity | |
Equipment features | 1. Fully enclosed heating channel, using internal heating technology, each heating tube independently controls temperature; 2. The entire series comes standard with a 6-layer security device, which is the only one in the industry; 3. Aluminum alloy doors are standard across the entire range, with excellent heat storage and explosion-proof performance; 4. The entire series comes standard with a 7-inch large screen human-machine operating system, which is beautiful and atmospheric; 5. The entire series comes standard with online and grid connected functionality; 6. High vacuum structure design, connected to a high vacuum pump, can be used as a high vacuum oven; 7. Intelligent interface, integrating monitoring/alarm, parameter settings, I/O faults, and data management, providing real-time feedback of device information | |
| Inner liner load-bearing capacity | Maximum 500KG | |
| Material loading method | Customer provided material box size: length, width, height 430 * 300 * 250mm, manually loaded. Each cavity is equipped with 5 layers, each layer contains 9 clips, and a total of 45 material boxes are placed in one inner container | |
| Failure rate | ≤2% | |
