High quality STC Anti vibration Mount vibration isolator

Natural Frequencies : 10 to 25 Hz

S.T.C. Anti vibration Mount are designed for multi-directional vibration isolation, shock attenuation and noise reduction due to structure-borne vibrations. These one-piece, fail-safe mounts are easy to install and provide consistentperformance.

S.T.C. supports consist of a rubber ring stuck to a central tube so that the lower bezel supports the assembly.
The design of this support gives it special characteristics:  simple assembly, work under compression, effective anti-rebound and fail-safe mounting.

The S.T.C. mount comprises a rubber ring bonded to a central tube.
· Inner tube : mild steel
· Bonded rubber in the form of a ring at the top with a collar below which is used for fixing.

Operation
The design of the S.T.C. mount gives the following basic characteristics :
· the rubber works in compression;
· anti-rebound;
· can be used as safety mounting.

Advantages
· Simple to fix.
· Simple and economical
· Extensive range of loads.

Reference	Ø A (mm)	B (mm)	Ø C (mm)	ΦD (mm)	E (mm)	ΦF (mm)	G (mm)
539887	20,6	17,5	10	27,7	5,6	20,6	8
539190	31,5	25,4	13	44,5	10,4	31,5	10
539886	34,3	35	13	50,8	13,5	34,3	16
539191	41,1	44,5	16	63,5	15,7	41,1	19
539920	38	23	16	64	16	38,5	19
539951	56,6	50,8	20	95	25,4	56	20

 

Operating Characteristics
 

Assembly
 

 

Company Profile

       Office                                                                          Factory                                                                   Show Room