Audited Supplier
JT45 highly efficient spiral bevel gears right angle and T drive provides high efficiency up to 98% with maximum input speed 1500 rpm, low backlash. Sturdy cast iron housings and hardened steel gears make them durable enough for even the toughest working conditions. Single right angle bevel or double inline T bevel tee outputs.
1. Maximum allowable torque 561 Nm, Maximum allowable power 65.3 kw, maximum allowable input or output speed 1500 rpm.
2. Spiral bevel gears ratios 1:1, 1:1.5, 1:2, 1:2.5, 1:3, 1:4, and 1:5 reduction ratios. Transmission efficiency up to 94-98%.
3. Used in pairs case hardened alloy steel spiral bevel gears to transmit rotary motion, mechanical power and torque.
4. Solid input and output shafts as standard. Customized hollow shaft, motor adapter like IEC, NEMA flange etc.
5. Two-way gearboxes, three-way 90° gearboxes, four-way right angle gearboxes configurations as standard.
6. 42 types input and output shaft arrangements and rotating directions. Note: input and output shafts can be rotated in both clockwise and anti-clockwise rotation directions.
7. Mouting positions: horizontal mounting, over hung mounting, side wall mounting.
8. Lubrication depends on output speed. Standard is industrial gear oil lubrication that is maintenance free.
9. High efficiency, high transmission capacity, low backlash, noiseless operation, low running temperature and long service life.
We use the best materials to guarantee the performance and lifetime of the bevel gearboxes you purchased.
* Housing: HT250 Cast Iron, High-strength Casting housing.
* Spiral Bevel Gears: High purity rugged alloy steel 20CrMnTi, Carburizing and Quenching, Case Hardened and Lapped in Pairs.
* Input Shaft and Output Shaft: Hardened and tempered alloy steel 40Cr as standard. Custom Stainless Steel 304 or 316.
* Bearing: Equipped with Tapered Roller Bearings with heavy load capacity. Custom reinforced bearings for higher radial and axial load. Custom Stainless Steel 304.
* Oil Seals: Double-lip Oil Seal, High Dust-proof and Oil leak proof.
* Lubricants: Applications with high speeds and/or high daily duty cycle, Gear oil #320 lubrication is recommended. But applications with low input speed (less than 200rpm) and low daily duty cycle, #0 or #00 lithium grease is recommended. Note: For input speeds 1500 rpm a change in oil level may be required in combination with a breather (vent).
* Free 2D AutoCAD Assembly Drawings (PDF, DWG, DXF Format).
* Free 3D CAD Model Assembly Drawings (STP/STEP, IGS/IGES, SLDPRT, MODEL, CATPART Format).
Before packing, all Customers' orders will be inspected following Production Drawings and Inspection Report.* Inspection of Screw Jack: model, screw diameter, screw pitch, installation type, basic design, stroke length, screw end types, wormgear ratio, worm shaft diameter, input shaft types, motor flange types, accessories, lubrications, housing color, orders with special requirements, smooth lifting.
* Inspection of Bevel Gearbox: model, input shaft diameter, output shaft(solid or hollow) diameter, input flange dimensions, shaft arrangements, rotation directions, mounting positions, gear ratios, accessories, lubrications, housing color, orders with special requirements.
* Inspection of Lifting System: except above points, must inspect the order quantities of jacks, gearboxes and others.
* Express(Air Courier): Factory to customers' company by FEDEX, DHL, UPS, TNT. Incoterms: EXW, DDU.* Sea Freight: Factory to destination seaport by Vessel. Incoterms: CIF, FOB, EXW, CFR.
* Air Freight: Factory to destination airport by Airplane. Incoterms: CFR, EXW, FCA, CPT, CIP.
* Additional Options (Door to Door): Train Transportation, Truck Transportation, Ocean Shipping.
* Asia: Malaysia, Indonesia, Singapore, Pakistan, Philippines, Vietnam, United Arab Emirates, Thailand, Saudi Arabia, Iran, Turkey, India, Sri Lanka, Israel, Jordan, Kuwait, Qatar.* America: United States, Mexico, Canada, Chile, Bolivia, Brazil, Colombia, Dominican Republic, Honduras, Argentina, Peru.
* Europe: Russia, Germany, Turkey, France, United Kingdom, Italy, Spain, Ukraine, Poland, Romania, Netherlands, Belgium, Greece, Czech Republic, Portugal, Sweden, Hungary, Belarus, Austria, Switzerland, Bulgaria, Denmark, Finland, Slovakia, Norway, Ireland, Croatia, Georgia, Armenia, Lithuania, Slovenia, Estonia, Cyprus, Luxembourg, Iceland.
* Australia: Australia, New Zealand, Fiji.
* Africa: South Africa, Egypt, Ethiopia, Nigeria.
