Audited Supplier
LCD:Display
Yes
Chongqing, China
Built-in
15
Yes
for Gba
OEM
No
15
8
Yes
Yes
720480
Product Description
Desaturation V5 720x480 Retro Pixel Laminated 3.0'' Drop in LCD Display IPS Backlight OSD Menu LCD Screen Kit for GBA
The firmware of this kit was upgraded on August 26, 2024. New firmware has added the following function:
1. Add Desaturation function! Adjust the desaturation to make the picture more like the original GBA. Desaturation from 0 to 20. Desaturation=20 is normal color. Desaturation=0 is black & white.
1. Add Desaturation function! Adjust the desaturation to make the picture more like the original GBA. Desaturation from 0 to 20. Desaturation=20 is normal color. Desaturation=0 is black & white.
2. Add 'Touch Shourtcut ON/OFF' function! Set 'Touch Shourtcut' OFF to avoid auto cycling colour modes.
The Glass screen lens has the LOGO.
Integer Scaling. No any distortions.
Add FRM On/OFF function(Frame blending On/OFF).
Product Description:
1. 720x480 display resolution. HD IPS LCD. 9 pixels to 1 pixel. Much better than 640*480 of other suppilers, No picture distort.
2. Wide View angle up to 178 degree.
3. Drop in IPS LCD for GBA. No need to cutting the shell case.
4. Same display size as the original LCD screen.
5. Built-in OSD Menu!
6. Retro pixel Effects: Normal, Retro pixel, Scanline 1, Scanline 2.
7. 15 brightness levels.
8. 8 color modes.
9. Touch Screen to change the brightness and the color modes.
10. Compatible with 32pin and 40pin motherboard.
11. Laminated
12. Add Desaturation function! Adjust the desaturation to make the picture more like the original GBA. Desaturation from 0 to 20. Desaturation=20 is normal color. Desaturation=0 is black & white.
13. Add 'Touch Shourtcut ON/OFF' function! Set 'Touch Shourtcut' OFF to avoid auto cycling colour modes.
Note: You don't need to cut the shell if you buy the shell from us. Otherwise, you need to cut the shell by yourself.
OSD Menu Operation:
-Press the Select+L+R buttons for 1 second at the same time, then release the buttons to activate the OSD Menu.
Note: You don't need to cut the shell if you buy the shell from us. Otherwise, you need to cut the shell by yourself.
OSD Menu Operation:
-Press the Select+L+R buttons for 1 second at the same time, then release the buttons to activate the OSD Menu.
-Press the Select button to select the adjustment item when OSD Menu activated.
-Press the L or R button to adjust the item when OSD Menu activated.
You don't need to do any welding if you don't want the OSD menu!
Packing including:
1x IPS LCD, 1x Adapter pcb, 1x Glass Screen lens, 1x Double-sided tape, 2x Screwdrivers, 2x Ribbion cables, 2x position sticks.
