Audited Supplier
HITRI
Horizontal
Hot Water
B
Analogue
15-50mm
Industrial, Water Metering
Speed of Water Meter
General Water Meter
Dry Water Meter
Traditional
DN 25
DN 32
DN 40
DN 50
NWM or OEM
Pallets
Nwm Ningbo, China
90282010
Product Description
HITRI Batch Control Water Meter is commonly used in the textile, tanning, paper, potting and chemical industries, also used for mixer truck, for controlling batched volume of the water passing through the pipe accurately, has the sizes from Dn25 to Dn50 designed by NWM.
FEATURES
1. Up To 90ºC Can be used safely in water temperature up to 90ºC;
2. Dial Plate Large dial plate for easy reading;
3. Wiper Glass wiper for cleaning;
4. Installation Horizontal or Vertical installation
Main Technical Data:
For keeping the accuracy, the flow rate (Q) should be not less than Qt. The flow rate is easily calculate by the water was collected in a calibration tank for a measured period of time. For example, 15 liters are collected in 30 seconds, the flow rate will be: 3600/30×15=1800l/h.
For selecting the dial reading, the maximum dial reading should always exceed the highest expected batch volume.
FEATURES
1. Up To 90ºC Can be used safely in water temperature up to 90ºC;
2. Dial Plate Large dial plate for easy reading;
3. Wiper Glass wiper for cleaning;
4. Installation Horizontal or Vertical installation
Main Technical Data:
| DN | mm | 25 | 32 | 40 | 50 |
| Qmax | m³/h | 7 | 12 | 20 | 30 |
| Qn | m³/h | 3.5 | 6 | 10 | 15 |
| Qt | l/h | 280 | 480 | 800 | 1200 |
| Daily Delivery | m³ | 35 | 60 | 200 | 300 |
| Dial Reading | Liters | 100-200-500 | 100-200-500-1000-2000-50000 | 500-1000-2000-5000 | |
Selecting the proper size of meter
For selecting the proper size should follow the table with maximum flow rate
(Q) in m3/h and the maximum daily delivery (E) in m3 as :
For selecting the proper size should follow the table with maximum flow rate
(Q) in m3/h and the maximum daily delivery (E) in m3 as :
For maximum service life should follow:
For selecting the dial reading, the maximum dial reading should always exceed the highest expected batch volume.
