Audited Supplier
IDO-WM-Cabinet-01
Product Line
Continuous
New
Manual
Engineers Available to Service Machinery Overseas
Yes
IDO
Anti-Rust Oil, Vacuum Packaging
Non-standard
China
8479899990
Product Description
Home Appliances Washing Machine Cabinet U-bending and Clinching Line
Front-loading washing machine cabinet U-bending and Clinching line (Manual)
Notes:
1.cycle time:<100s/p.
2.space required:4*7m
3.operator required: 4 persons
| No. | Name | Qty | Unit | Application |
| 1 | U-bending machine | 1 | set | Used for U-bending of flat cabinet |
| 2 | connecting plate clinching machine | 1 | set | Used to clinch the connecting plate with the U-bended cabinet |
| 3 | top reinforcement clinching tooling | 1 | set | Used to manually clinch the top reinforcement (left and right) to the U-bended cabinet |
| 4 | bottom reinforcement clinching tooling | 1 | set | Used to manually clinch the bottom reinforcement (left and right) to the U-bended cabinet |
1.cycle time:<100s/p.
2.space required:4*7m
3.operator required: 4 persons
ST1:U-Bending machine The frame is a square tube welded frame.
The control cabinet is fixed on the machine, and the machine is equipped with a start button and a stop button.
The upper pressing cantilever is driven up and down by the cylinder.
Use the cylinder to lock the upper pressing cantilever.
The lower bending die moves up under the drive of the cylinder to complete the bending.
For the positioning blocks around the cabinet sheet body, two sides are stationary, and the rest two sides are adjustable, driven by cylinder.
In order to achieve compatible production of various models, the position of the positioning blocks need to be adjusted by using different screw holes, and the corresponding screw holes need to be marked with the corresponding model.
In order to avoid scratches on the paint surface of the cabinet body sheet, special materials should be used for the components in contact with the paint surface. These components should be polished.
The machine is protected around by grating + mesh, and a three-color light is set at the highest point.
ST2:Connecting plate clinching machine
The overall frame of the machine is welded by steel plates.
The control cabinet is fixed on the machine, and the machine is equipped with a start button and a stop button.
The gas-liquid booster cylinder is used to provide clinching power, and clinching of two sides of the connecting plate are carried out simultaneously.
Use the profiling positioning block to confirm the position of the cabinet main body, and the cylinder drives the profiling block to move up and down.
In order to achieve compatible production (several models), each model is arranged with one set of profiling positioning block.
Service life of clinching punch and die: ≥80000 times
The machine is protected around by grating + mesh, and a three-color light is set at the highest point.
The overall frame of the machine is welded by steel plates.
The control cabinet is fixed on the machine, and the machine is equipped with a start button and a stop button.
The gas-liquid booster cylinder is used to provide clinching power, and clinching of two sides of the connecting plate are carried out simultaneously.
Use the profiling positioning block to confirm the position of the cabinet main body, and the cylinder drives the profiling block to move up and down.
In order to achieve compatible production (several models), each model is arranged with one set of profiling positioning block.
Service life of clinching punch and die: ≥80000 times
The machine is protected around by grating + mesh, and a three-color light is set at the highest point.
ST3 & ST4: Upper/lower bracket clinching tooling
The overall frame of the device is welded by steel plates, and the clinching tools are suspended by cantilever suspension.
The gas-liquid booster cylinder is used to provide clinching power. First, manually put the U-bended cabinet to the proper position of the tooling, then place the upper (or lower) bracket to finish the clinching manually in multiple times.
The control cabinet is movable, independent from the main body, but is connected with the main body, and the start button is installed on the control cabinet.
The overall frame of the device is welded by steel plates, and the clinching tools are suspended by cantilever suspension.
The gas-liquid booster cylinder is used to provide clinching power. First, manually put the U-bended cabinet to the proper position of the tooling, then place the upper (or lower) bracket to finish the clinching manually in multiple times.
The control cabinet is movable, independent from the main body, but is connected with the main body, and the start button is installed on the control cabinet.
Service life of clinching punch and die: ≥80000 times
| NO. | Parts Name | Brand |
| 1 | Servo motor | Mitsubishi |
| 2 | PLC | Mitsubishi |
| 3 | Touch screen | Mitsubishi |
| 4 | Motor | SE W/WANNAN/TECO/lianghao/ CPG |
| 5 | Guide rail, Slider | HIWIN |
| 6 | Hydraulic valve | Yuken/ KOMPASS |
| 7 | Pneumatic element | FES TO/SMC/ AirTAC |
| 8 | Bearing | SK F/NSK/HRBBIN |
| 9 | Sensory switch | Keyence/Omron/Schn eider |
| 10 | SAFETY LIGHT CURTAIN | LNTECH/SDKELI |
| 11 | Clinching punch and die | IDO made |
