Audited Supplier
D266.7*L76.6mm
Euro V
ISO9001
Catalytic Converter
East Asia
266.7mm(10.5 Inch)
152.4mm(3 Inch)
400 Cpsi
1%
More Than 15 MPa(Side a)
550 Deg C, Three Times
23%-27%
0.40-0.50 Kg/L
More Than 1300 Centigrade
SAFEEP
Carton
D144*L152mm
Jiangsu, P. R. C.
6909110090
Product Description
| Product Description |
Description
Ceramic honeycomb substrate is a catalyst carrier. Because of its characteristics such as good thermal shock, good adsorption properties, low coefficientof thermal expansion, certain mechanical strength and matches good with a variety of active catalyst,it is widely used in exhaust emission treatment,such as vehicles,generator sets and construction machinery.
We can supply both uncoated ceramic substrate and ceramic substrate coated with precious metals of Pt, Pd, Rh(DOC/TWC/SCR).
Properties
Ceramic honeycomb substrate is a catalyst carrier. Because of its characteristics such as good thermal shock, good adsorption properties, low coefficientof thermal expansion, certain mechanical strength and matches good with a variety of active catalyst,it is widely used in exhaust emission treatment,such as vehicles,generator sets and construction machinery.
We can supply both uncoated ceramic substrate and ceramic substrate coated with precious metals of Pt, Pd, Rh(DOC/TWC/SCR).
Properties
1. High specific surface area: ensure exhaust gas could contact weigh catalyst enough.
2. Stable water absorption: guarantee catalyst could be firmly and evenly coated on the surface of substrate.
3. Fast in temperature rising: The temperature of substrate could reach the active temperature of catalyst in the shortest time.
4. Thin wall thickness:lower backpressure with thin wall thickness.
5. customization acceptable.
| Parameters |
| ITEM | Parameters | |
| Chemical Composition | Al2O3 | 35.2±1.5 wt% |
| SiO2 | 50.9±1.5 wt% | |
| MgO2 | 13.9±1.5 wt% | |
| Content of Cordierite | ≥90% wt% | |
| Compressive Strength (Side A) | ≥15 MPa | |
| Water Absorption Rate | 23%-27% | |
| Thermal Expansion Coefficient (room temperature -800 ºC) | ≤1.2×10-6 cm/cm/ºC | |
| Thermal Shock | 550ºC three times | |
| Softening Temperature | 1380ºC | |
| Wall Thickness | 100 cpsi | 0.42-0.48 mm |
| 200 cpsi | 0.32-0.38 mm | |
| 300 cpsi | 0.25-0.31 mm | |
| 400 cpsi | 0.17-0.20 | |
| 500 cpsi | 0.12-0.15 | |
| Diameter Tolerance | ≤300 mm | ±2 mm |
| >300 mm | ±2 mm | |
| Length Tolerance | ≤160 mm | ±1.5 mm |
| >160 mm | ±2 mm | |
| Verticality | Length ≤ 100 mm | ≤1 mm |
| Length > 100 mm | ≤1% × length | |
| Parallelism | Diameter ≤ 100 mm | ≤0.6 mm |
| Diameter > 100 mm | ≤0.6% × diameter | |
| Catalog of Some Common Sizes |
| Shap | Size | |
| mm | inch | |
| Round | 76.2×50.8 | 3×2 |
| 76.2x101.6 | 3×4 | |
| 80x50.8 | 3.15×2 | |
| 80x60 | 3.15×2.36 | |
| 80x95 | 3.15×3.74 | |
| 83x60 | 3.27×2.36 | |
| 83x80 | 3.27×3.15 | |
| 83x85 | 3.27×3.35 | |
| 83x101.6 | 3.27×4 | |
| 88x85 | 3.46×3.35 | |
| 88x101.6 | 3.46×4 | |
| 88x152.4 | 3.46×6 | |
| 93x76.6 | 3.66×3 | |
| 93x101.6 | 3.66×4 | |
| 93x118 | 3.66×4.65 | |
| 93x152.4 | 3.66×6 | |
| 97x88.9 | 3.8×3.5 | |
| 97x114.3 | 3.8×4.5 | |
| 97x170 | 3.8×6.7 | |
| 101.6x50.8 | 4×2 | |
| 101.6x76.2 | 4×3 | |
| 101.6x123.4 | 4×4.86 | |
| 101.6x152.4 | 4×6 | |
| 105.7x130 | 4.16×5.18 | |
| 105.7x152.4 | 4.16×6 | |
| 110x80 | 4.33×3.25 | |
| 110x130 | 4.33x5.18 | |
| 110x165 | 4.33x6.5 | |
| 118.4x60 | 4.66x2.36 | |
| 118.4x95 | 4.66x3.74 | |
| 118.4x118.4 | 4.66x4.66 | |
| 118.4x127 | 4.66x5 | |
| 118.4x152.4 | 4.66x6 | |
| 143.7x75 | 4.66x2.95 | |
| 143.7x101.6 | 4.66x4 | |
| 143.7x127 | 4.66x5 | |
| 143.7x152.4 | 4.66x6 | |
| 143.7x177.8 | 4.66x7 | |
| 150x100 | 5.9x3.94 | |
| 150x152.4 | 5.9x6 | |
| 170x50 | 6.7x1.97 | |
| 170x101.6 | 6.7x4 | |
| 190.5x101.6 | 7.5x4 | |
| 190.5x152.4 | 7.5x6 | |
| 228.6x76.6 | 9x3 | |
| 228.6x101.6 | 9x4 | |
| 228.6x152.4 | 9x6 | |
| 241.3x76.6 | 9.5x3 | |
| 241.3x101.6 | 9.5x4 | |
| 241.3x152.4 | 9.5x6 | |
| 266.7x76.6 | 10.5x3 | |
| 266.7x101.6 | 10.5x4 | |
| 266.7x152.4 | 10.5x6 | |
| 285.7x76.6 | 11.25x3 | |
| 285.7x101.6 | 11.25x4 | |
| 285.7x152.4 | 11.25x6 | |
| 304.8x76.6 | 12x3 | |
| 304.8x101.6 | 12x4 | |
| 304.8x152.4 | 12x6 | |
| 330.2x76.6 | 13x3 | |
| 330.2x101.6 | 13x4 | |
| 330.2x152.4 | 13x6 | |
| 80x57x108 | 3.15x2.24x4.25 | |
| 95x115x132 | 3.74x4.52x5.2 | |
| 99.8x68.1x120.6 | 3.93x2.68x4.75 | |
| 112x60x90 | 4.4x2.36x3.54 | |
| 114x105x105 | 4.48x4.13x4.13 | |
| 120.6x80x100 | 4.75x3.15x4 | |
| 120.6x80x140 | 4.75x3.15x5.5 | |
| 120.6x80x152.4 | 4.75x3.15x6 | |
| 125.3x80.2x101.6 | 4.93x3.16x4 | |
| 125.3x80.2x152.4 | 4.93x3.16x6 | |
| 127x63.5x107 | 5x2.5x4.21 | |
| 144.3x68.1x125 | 5.66x2.68x4.92 | |
| 147x84x125 | 5.79x3.3x4.92 | |
| 147x95x120 | 5.79x3.74x4.72 | |
| 147x95x152.4 | 5.79x3.74x6 | |
| 152.4x101.6x152.4 | 6x4x6 | |
| 169.7x80.8x110 | 6.68x3.18x4.33 | |
| 169.7x80.8x127 | 6.68x3.18x5 | |
| 169.7x80.8x152.4 | 6.68x3.18x6 | |
| Triangular | 143.5x84 | 5.65x3.3 |
| Trapezoidal | 112.2x92 | 4.42x3.62 |
| 122.3x104.4 | 4.81x4.11 | |
| Rectangle | 119.5x99.5 | 4.7x3.92 |
| Pear-shaped | 120.2x108 | 4.73x4.25 |
| Packing and Transportation |
| FAQ |
Yes, we do. Please tell us your detailed requirements, such as diameter, height, cells density and usage, etc. We will do it for you.
2.Samples free or not?
You can get a free sample if we have it in stock, but you should to pay the freight.
3.How can you guarantee quality?
All products will be automatically inspected by machines after production is completed, and manual re-inspection before shipment.
4.What products you can provide?
We can privide diesel particulate filter, ceramic honeycomb substrate and matal honeycomb substrate for catalyst, catalytic converter and sensors.If you need other components of exhaust aftertreatment device, please tell us and we will find them for you.
5.What's about the payment?
30% payment in advance and balance before shipment, we will show you the photos of goods and package before you pay the balance payment.
T/T,Western Union,Paypal are acceptable.You can pay it in Chinese yuan, US dollars, Euros, or Japanese yen.
