Audited Supplier
HJ
Lifetime Maintenance
CE, ISO
1 Year
5%~98% Humidity Range
150kg
Rubber,Electronic Product
Room Temperature~100ºC
Hongjin
Fumigation-Free Standard Export Wooden Box
China
Product Description
Scope of application
High and low temperature and low pressure test chamber is mainly used for aviation, aerospace, electronics, national defense, scientific research and other industrial departments to determine the electrician of electronic technology products (including components, materials and instruments). Under the single or simultaneous action of high and low temperature and low pressure, the storage and transportation reliability test is carried out, and the electrical performance parameters can be tested by electrifying the specimen at the same time.
Equipment features
High altitude and low pressure simulation test chamber is also known as aviation simulation transport test chamber. The test cycle can be automatically controlled when the low pressure storage state of the sample is reached in a short time (for example, 6HO, the whole process of monitoring the pressure change in the box, to realize the automatic termination of the test). Controller touch screen control, can form the enterprise internal unified testing standards; The real empty box adopts organic glass, high transparency, good perspective, can clearly observe the whole test process, can directly reflect the leak point, convenient and flexible use.
Product parameters
| Material of outer box: | A3 cold plate baking paint, thickness 1.5mm |
| Pressure range: | 0.5 ~ 100Kpa, commonly tested pressure 11.6Kpa |
| Inner box size: | W500xH500xD500mm |
| Outer box size: | W650×H1300×D650 |
| Material of storage partition: | Stainless steel |
| Vacuum degree display: | Digital display vacuum meter control, accurate display vacuum degree, easy to set vacuum degree |
| Timer: | LED digital display, can be set freely within 0-9999H (H/M/S seconds can be switched) |
| Pressure fluctuation: | ≤5% |
| Power supply for equipment: | AC220V, 50HZ, 2.2KW |
| When used, the temperature in the laboratory must be controlled to reach (20ºC+5ºC) before the temperature requirements in the test box can be reached | |
| Add wiring terminals for power-on testing | |
