Horizontal H Beam Straightening Machine Automatic H Beam Welding Production Line

H-beam steel horizontal production line is a special welding production line that directly assembles steel plate into H type steel. Compared with the ordinary H-beam steel vertical welding production line (T type first,H type after), it has the characteristics of high production efficiency and low welding deformation, and is especially suitable for the welding production of light type. The production line consists of assembling machine, front welding machine, overturning machine, end welding machine and input/output conveyor , can achieve H type steel group, welding, turning, transportation and other work. H-beam steel horizontal production line can improve the working efficiency and reduce the operation cost, the efficiency is 1.5 times that of the ordinary steel and the security is better, it also can adapt to various environments.
 

1.When assemble, just needed to do spot welding of H beam end, then can go into the welding process, welding machine will re-position the three plate, thus increase assemble speed.

2.Work piece is put horizontally (web is horizontal and flange is vertical), and beam will move during welding, and can weld two seam at the same time to reduce deformation caused by welding heat.

3.A variety of welding methods,submerged arc welding and gas shielded welding are available.

4.Machine is equipped with Lincoln DC-1000 welders, which used single arc double wire welding mode, wire diameter is 1.6mm, and welding speed can reach 1200mm/min, the welding seams are well formed and look beautiful.
 

5.It is suitable to weld variable cross section H beam ≤8°.

6.This line is more automatic then traditional ones, so can reduce the labor intensity, and reduce operator, only need 4~5 operators for normalproduction.

Steel Sheet Cutting Machine --> H beam Assembling Machine --> H Beam Welding Machine --> H Beam Straightening Machine -->Shot Blasting