Audited Supplier
Heavy-duty Lathe LY800B
Horizontal Lathe
Horizontal Guide Rail
Electric
Artificial
Semiautomatic
Floor-type
High Precision
Spindle Bore
West Industry
Wooden Case
Product Description
Product Name: Heavy-duty Lathe LY800BPerformance:
· High-Performance Parallel lathe;
· The machine is suitable for turning internal and external cylindrical, conical and swing surfaces as well
as various metric, inch, module and diametric pitch threads. Also can be used for broaching oil grooves
and keyways;
· Casted in whole piece, box type internal structure, of high rigidity, with hardened guideway. The rigidity is
high. The precision is stable. And these lathes can carry out string force cutting;
· On apron, there is a device, operated by a single lever, used for rapid traverse of the carriage. Spindles
braking and rotating direction change is controlled by hydraulic system, or by hand operation, all to
users choice;
· The saddle guide-way of the lathe is glued by "TSF" soft belt wear resisting materials;
· The top slide can be used independently for turning of short cone, in combination with longitudinal
feeding, it can also turn ling taper surface.
Main Technical Data of The Machine:
· High-Performance Parallel lathe;
· The machine is suitable for turning internal and external cylindrical, conical and swing surfaces as well
as various metric, inch, module and diametric pitch threads. Also can be used for broaching oil grooves
and keyways;
· Casted in whole piece, box type internal structure, of high rigidity, with hardened guideway. The rigidity is
high. The precision is stable. And these lathes can carry out string force cutting;
· On apron, there is a device, operated by a single lever, used for rapid traverse of the carriage. Spindles
braking and rotating direction change is controlled by hydraulic system, or by hand operation, all to
users choice;
· The saddle guide-way of the lathe is glued by "TSF" soft belt wear resisting materials;
· The top slide can be used independently for turning of short cone, in combination with longitudinal
feeding, it can also turn ling taper surface.
Main Technical Data of The Machine:
| Specification | |||||
| Model | Unit | LY800B | |||
| Capacity | |||||
| Swing over bed | mm | 800 | |||
| Swing over carriage | mm | 480 | |||
| Maximum length of workpiece | mm | 1500 | 3000 | 5000 | |
| Maximum turning length | mm | 1350 | 2850 | 4850 | |
| Span of guideway | mm | 600 | |||
| Spindle | |||||
| Spindle nose code | C15 | ||||
| Diameter of spindle thru hole | mm | 100 | |||
| Taper hole of spindle | mm | 1:20/150 | |||
| Number of forward turning speeds | 18 | ||||
| Number of reverse turning speeds | 6 | ||||
| Spindle speeds (Forward) | r/min | 5.5-750 | |||
| Spindle speeds (Reverse) | r/min | 10-775 | |||
| Feed motion | |||||
| Longitudinal and cross | 64;0.1-24;32 | ||||
| Cross-to-longitudinal feed rate | 1/2 | ||||
| Screw pitch of leadscrew | 12 | ||||
| Number and range of metric thread | 50; 1-240 | ||||
| Number and range of inch thread | 26; 14-1 | ||||
| Number and range of module thread | 53; 0.5-120 | ||||
| Number and range of diametrical pitch thread | 24; 28-1 | ||||
| Rapid traverse speed of carriage | mm/min | 4000 | |||
| Tool post | |||||
| Distance between spindle center-line and tool resting plane | mm | 33 | |||
| Section of tool shank | mm | 32 | |||
| Tool post swing range | º | ±90º | |||
| Max.travel of top slide | mm | 200 | |||
| Max.travel of cross slide | mm | 500 | |||
| Tailstock | |||||
| Diameter of Tailstock quill | mm | 100 | |||
| Travel of tailstock quill | mm | 250 | |||
| Taper Hole of Tailstock quill | Morse | 5 | |||
| Acceptance conditions | GB/T4020-1997 Accuracy parallel lathe | ||||
| JB/T2322-1993 Terms parallel lathe | |||||
| Others | |||||
| Main motor power | kw | 11 | |||
| Machine mass | kg | 4900 | 5500 | 6900 | |
| Length | mm | 3660 | 5155 | 7390 | |
| Hight | mm | 1630 | |||
| Width | mm | 1450 | |||
