Horizontal Pressure Steam Sterilizer Auto Clave Mushroom Steam Sterilization Equipment 150/200/280/400/500 Liter Capacity

Model:CCS-YDA

Characteristics

• Automatially controlled the sterilizing process, easy to operate.
• With drying function, suitable for the medical dressing drying.
• With overtemperature, overpressure autoprotect.
• The door can not be open until the pressure in the chamber is reduced to 0.027MPa. And the unit can not be started on if the door doesn't close well.
• The safety valve will be open automatically when the inner pressure over 0.24MPa and the steam would be exhausted the water tank.
• Automatically cut off the power if the waterlack happened, and alarm at the meanwhile.
• Fully stainless steel structure.
 

Uesd toThis horizontal pressure sterilizer adopts a gravity displacement method to eliminate the cold air in the inner chamber, reducing the content of steam cold air in the inner chamber and making sterilization more reliable. At the same time, during the sterilization process of the equipment, the control system automatically adjusts the inlet and outlet steam based on the indoor temperature. Mainly applicable to hospital supply rooms, operating rooms, pharmaceutical factories, and research unit laboratories, for sterilization treatment of medical and experimental cloth items, surgical instruments, and utensils. The sterilization process is automatically controlled without supervision and is convenient to use. Overpressure protection: The safety valve automatically relieves pressure when the pressure exceeds the working pressure. It has a drying function to achieve the drying effect of sterilized items. Low water level protection device: The water cannot be started before reaching high water level, and it will automatically cut off power for protection when low water level is lacking. Equipped with automatic protection devices for over temperature and over pressure. Safety interlock device: When the door is not tightly closed, steam cannot enter the inner main body and an alarm prompt is given. When the pressure in the sterilization room is greater than 0.027MPa, the door is interlocked and cannot be opened. Overcurrent protection: When the current is overloaded, the power circuit breaker automatically cuts off the power supply. The sterilization room is made of high-quality stainless steel.

Technical Data

Sterilizing chamber volume	150L φ440×1000	200L φ515×1000	280L φ600×1000	400L φ700×1100	500L φ700×1300
Working pressure	0.22Mpa
Working temperature	134ºC
Temperature adjust range	40ºC-134ºC
Time for sterilization	0-60min
Time for drying	0-60min
Heat average	≤±2ºC
Power	9kw/380V 50Hz	9kw/380V 50Hz	12kw/380V 50Hz	18kw/380V 50Hz	18kw/380V 50Hz
Dimension(mm)	1400×600×1300	1400×670×1650	1400×770×1780	1430×880×1830	1880×900×1820
Exterior package dimension(mm)	1550×750×1850	1560×820×1850	1680×920×2100	1600×1050×2100	1850×1050×2100
G.W/N.W	320/240kg	350/260kg	465/365Kg	530/420Kg	580/470Kg

 

We CONCERNMED make one-stop shopping hospital medical equipment: