Audited Supplier
2W. W
1 Year
Oil Pump
Variable Pump
TRUSTTRADE
Export Wooden Case
GB, DIN, JIS
China
84133090
Product Description
Horizontal Twin screw pump
On the base of deeply researching overseas adcancde technique, according to the present-day practical demands of gas-oil mixed transporting, 2W. WH--type out board bearing double suction dualscrew multtiphase mixed transporting pump and 2W. Wseries double screw pump are researched and deceloped by our company, then we follow the regulations of the national standard GB11035-89 and produced it. Through engagement together between dricing srew and driwen screw and the match between screw andpump body hole, and then form many sealing empty cacities, when the screw is rotational, these sealin empty cavitiel move ahead continually, push the liquid in the sealing cavity to the exit and then discharged, so the purpose of transporting the liquid can bei relized.
1 Transporting the liquid smoothly without any disturbing and pulsation, no impulse, with less vibration and low noise.
2 It has strong selr-suction performance, when multiphase mixed transporting, the gas content can not over 80%, and the san content can not over 500G/M3.
3 Outboard bearing structure which qdopt independently lubricate, so aoo kinds of nonlubricate medium can be transported.
4 It adopts synchronous gear drinving, between the two totors there is no touch at all, ecen though idling for short term is no problem.
5 The pump body has heating jacket, so it can transport all kinds of clean or low viscosity or high viscosity mediuum which contain the particulate solids. (the diameter of the particulate is usually less than 0.12-0.2mm)
6 If selecting the material correctly, some corrosive medium can be transported.
7 Double-suction structure, and there is no axial force on the rotor.
8 The shaft ends adopt mechanical seal or corrugated pipe mechanical seal, it has the characteristic of long-life, less leak, wide scope of application.
1 The highest pressure 4.0MPa
2 Capacity range 1~1000m3/h
3 Temperature range -20~120degree
4 Three ciscosity of the medium 1~3000mm2/s, when lower the speed of the rotation it can be up to 106mm2/s
The viscosity of the medium will largely influende the twin screw pump, the nominal discharge of the pump means the discharge under the certain ciscosity condition, in order to ensure the pump to work on the high efficiency working condition, wehn the test is not enough, we suggest to select the speed of the fotation according to the following viscosity.
On the base of deeply researching overseas adcancde technique, according to the present-day practical demands of gas-oil mixed transporting, 2W. WH--type out board bearing double suction dualscrew multtiphase mixed transporting pump and 2W. Wseries double screw pump are researched and deceloped by our company, then we follow the regulations of the national standard GB11035-89 and produced it. Through engagement together between dricing srew and driwen screw and the match between screw andpump body hole, and then form many sealing empty cacities, when the screw is rotational, these sealin empty cavitiel move ahead continually, push the liquid in the sealing cavity to the exit and then discharged, so the purpose of transporting the liquid can bei relized.
1 Transporting the liquid smoothly without any disturbing and pulsation, no impulse, with less vibration and low noise.
2 It has strong selr-suction performance, when multiphase mixed transporting, the gas content can not over 80%, and the san content can not over 500G/M3.
3 Outboard bearing structure which qdopt independently lubricate, so aoo kinds of nonlubricate medium can be transported.
4 It adopts synchronous gear drinving, between the two totors there is no touch at all, ecen though idling for short term is no problem.
5 The pump body has heating jacket, so it can transport all kinds of clean or low viscosity or high viscosity mediuum which contain the particulate solids. (the diameter of the particulate is usually less than 0.12-0.2mm)
6 If selecting the material correctly, some corrosive medium can be transported.
7 Double-suction structure, and there is no axial force on the rotor.
8 The shaft ends adopt mechanical seal or corrugated pipe mechanical seal, it has the characteristic of long-life, less leak, wide scope of application.
1 The highest pressure 4.0MPa
2 Capacity range 1~1000m3/h
3 Temperature range -20~120degree
4 Three ciscosity of the medium 1~3000mm2/s, when lower the speed of the rotation it can be up to 106mm2/s
The viscosity of the medium will largely influende the twin screw pump, the nominal discharge of the pump means the discharge under the certain ciscosity condition, in order to ensure the pump to work on the high efficiency working condition, wehn the test is not enough, we suggest to select the speed of the fotation according to the following viscosity.
| 2W.W | H | 6.1 | 64 | B | II |
| Series code | Mix-transportation type | Spec code | Screw pitch | Seal code | Material code |
