Audited Supplier
KYYC-510
1 Year
Horizontal Lathe
Horizontal Guide Rail
Electric
Artificial
Manual
Table
High Precision
CE
New
52mm
510mm
330mm
252mm
200mm
1500mm
360mm
Mt6
2,25 Module
5HP
KY
Wooden Case
China
Product Description
| KYYC-410 | KYYC-510 | KYYC-660 | |
| Max. swing over bed | 410mm | 510mm | 660mm |
| Max. swing over cross slide | 240mm | 330mm | 360mm |
| Max. swing over gap | 590mm | 660mm | 760mm |
| length of gap | 252mm | ||
| Effective length of gap | 200mm | ||
| Distance between centers | 1000mm | 1500mm | 2200mm |
| Bed width | 360mm | ||
| front prism with 90 degrees inclined at 60 degrees from the front face of the busbar | |||
| Spindle hole | 52mm | ||
| Spindle nose Canlock | C6 | ||
| Inside taper of spindle bore | MT6 | ||
| Range of spindle speed (18 steps of forward and backward each) | 33 -2250r/min. | ||
| Longitudinal direction | 0. 042-8.64 | ||
| Range of thread cutting Metric mm | 0.5-88 | ||
| Inch n/1" | 72-0.4375 | ||
| Моdulе ил | 0.25-2 | ||
| Diameter n/n" | 144-1.25 | ||
| Gears Exchange | 2,25 Module | ||
| Max. travel of top slide | 95mm | ||
| Max. travel of cross slide | 200mm | 250mm | |
| Cross section size of tool shank | 20X20mm | 25X25mm | |
| Inside taper of tailstock sleeve bore | MT4 | ||
| Max travel of tailstock sleeve | 150mm | ||
| Power of main motor | 3HP | 5HP | 8HP |
OEM FEATURES:
Fully conventional mechanical lathe, intended for turning materials by revolution, equipped with a system for cosca machining with steps in millimeters, inches, diametralpit and module thread. With change gear with module 2.25, with advance and thread function being performed by the same spindle, which has protection constrained in rigid steel plate. Tempered and rectified busbar, 360mm wide, front prism with 90 degrees inclined at 60 degrees from the front face of the busbar, this one with a width of 40mm. Removable armhole with a length of 252mm.
