Audited Supplier
W-F168-A
Non-Customized
CE, ISO13485
Human Blood Processor
Dialyzer Reprocessing Machine W-F168-a
0.15~0.35MPa, (20p.S.I~50p.S.I)
10ºC~40ºC
1.5L/Min
About 12 Minutes Per Cycle
5ºC~40ºC
5ºC~40ºC at Relative Humidity<=80%;
12 Months
Mermaid
Carton
CE ISO
China
Product Description
Hospital Clinical Hemodialysis Equipment Dialysis Care Dialyzer reprocessing machine W-F168-A
Dialyzer reprocessing machine is the main device for hospital to sterilize, clean, test and affuse reusable dialyzer used in hemodialysis treatment. And can just been used in hospital only.
Advantages:
1. Reduce the burden on medical staff: Dialysis machine can automate the cleaning, testing, and disinfection of dialyzers, thereby reducing the workload of medical staff and freeing them from tedious manual reuse
2. Improve the efficiency of dialyzers: Through the reuse machine, dialyzers can be reused 5-20 times, significantly reducing the cost of dialysis consumables and saving medical costs
3. Improve biocompatibility: The reuse machine reduces discomfort and side effects for patients during dialysis by improving the biocompatibility of the dialysis membrane, thereby enhancing patient comfort
4. Environmental benefits: Due to the fact that dialyzers are non degradable materials, large-scale disposal can cause a burden on the environment. Reusing dialyzers through reuse machines can help reduce environmental pollution
5.Prevention of allergic reactions: Disinfection with ethylene oxide can effectively prevent the syndrome of first-time use of dialyzers and allergic reactions, reducing the risk of allergies caused by new dialyzers in patients
Models:
1. W-F168-A: Can only clean one dialyzer automatically.
2. W-F168-B: Can clean two dialyzers separately at the same time within around 12 minutes.
Description:
| Model | W-F168-A(Single work station) |
| Water input pressure: | 0.15~0.35Mpa, (20P.S.I~50P.S.I) |
| Water input temperature: | 10ºC~40ºC |
| Minimum water inlet flow: | 1.5L/min |
| Reprocessing time: | about 12 minutes per cycle |
| Work environment temperature | 5ºC~40ºC |
| Storage temperature should be between | 5ºC~40ºC at relative humidity<=80%; |
