Audited Supplier
Disposable Nursing Pads Packing Bagging Machine
Technical data:
1. Packing speed:15bags/min-18bags/min
2.Film thickness:0.04-0.09mm
3.Packing bag material:OPP, CPP,PE ,complex film
4. Power supply:AC380V
5. Air supply voltage:0.6MPA
6.Gross power:16KW
7. Packing size:Length:150-300mm,300mm-430mm
Width:160~350mm
Height:80~150mm,150mm-210mm (can be customized if needed)
8. Weight: 1600KG
9.Machine overall size:L3500mm×W3400mm×H2000mm
Advantage:
1.Mainly used for large packaging pet pad, diapers, baby pull-up pants,nursing pad,etc.
2.Fast change-over capability/time: 20-30min for size
3.Full-servo control automation system can save manpower and lower material and labor costs.
4.Sealing : German heat wiring
5.Bag sealing quality/integrity: guesset offset range 2mm-3mm
6.Two bag supplying unit design:one for use; one for back-up; 100 bags running
7.Flexible:wheels can let machine to move from line A to line B
8.Bag Standability:>16 second
9.Bag Seal Integrity :no burn through, no wrinkles ingusseted area.
Packing Leader's plant covers an area of 10,000 square meters and employs more than 50 highly skilled workers. We produce more than 300 packaging machines per year and sell them to more than 40 countries around the world.
Packing Leader's plant covers an area of 10,000 square meters and employs more than 50 highly skilled workers. We produce more than 300 packaging machines per year and sell them to more than 40 countries around the world.
At Packing leader, we design/develop all the machines. After the installation and debugging of the machines in the factory by high-tech masters, they are packaged and sent to your company. The installation is not complete until the machine is connected to the host and debugged to a normal and stable operating state as required.
After the assembly workers get the drawings, they assemble the machine in strict accordance with the drawings and the instructions of the design department personnel. During the installation process, the safety performance check of the machine is carried out simultaneously.
After the assembly workers install, the company's special inspection personnel will check the machine in time to confirm that the machine is accurately installed according to the design and can operate normally. This not only guarantees the high precision of our products, but also maximizes production efficiency.
Packing Leader pays attention to the coordination and cooperation of employees in different departments. The offices of different departments, such as design department, research and development department, testing department, assembly department and adjustment department, are closely adjacent to each other, which can fully mobilize the division of labor and cooperation of different departments and ensure the high-speed production of machines with higher quality and more accurate standards.
All the core components of the machine you can ask us, in addition, all the parts of our machines are with INOVANCE,MITSUBISHI ELECTRIC,FOTEK,CNSY, AIRTAC, CHNT,C-LIN and other well-known brands cooperation.98 % of the spare parts is available in stock and well managed by ERP systems.
