Audited Supplier
ccs0
New
Silver
Feeding, Cattle
Steel
Cattle
2.05m High
3m Long
50X50X2mm, 40X80X2mm
XMM
on Steel Pallet
2.05m high, 3m long
China
73089000
Product Description
Hot dipped galvanized economy heavy duty cattle crush (ccs0)
Cattle crush has an internal width 750mm, overall length about 3.05m, 4 doors on the operating side and no doors on the other side. The cattle crush is supplied as 4 pieces kit(headbale, 2 sides & a slide gate)which just pins together.
If you need it, contact us freely.
Cattle crush has an internal width 750mm, overall length about 3.05m, 4 doors on the operating side and no doors on the other side. The cattle crush is supplied as 4 pieces kit(headbale, 2 sides & a slide gate)which just pins together.
| Cattle headbail | With auto-wrench Pre galvanized, zinc coating 100g/m2 Fully 360degree welded, 2050mm high, 1650mm wide Internal width is 750mm(does not including vertical tube) All the tubes are 50x50x1.6mm square tubes Galvanized sheet, With welded caps | 1 piece |
| Sliding gate | Sliding gate Pre hot dipped galvanized,zinc coating 100g/m2 2050mm high, 1060mm wide Frame tube: 50x50x2mm Internal width is 750mm(does not including vertical tube) 6 Rail of 40x80x1.6mm with the rail evenly spaced Big Pulley: 3 sets per door A small plastic wheel in the bottom Handle:32mm round pipes With welded caps 1 flat feet With 8 U lugs: 100x60x4mm | 1piece |
| Crush panel | Cattle crush side panel Cattle panel on one side Pre galvanized, zinc coating 100g/m2 Fully 360degree welded 2000mm high, 3050mm long. All the tubes are 50x50x2mm With 7 rails, 4 rails with galvanized sheet, 3 rails are not. Galvanized sheet is 1.0mm thick. With caps, lugs and pins Cattle panel gates on the other side Total 2000mm high, 3050mm long. All the tubes are 50x50x2mm Total 4 doors, with spring latched lock Longer door, inertnal wide is 1995mm Smaller door, internal wide is 725mm With caps, lugs and pins | 1 set |
If you need it, contact us freely.
