Audited Supplier
The pneumatic baler is a friction welding type baler. The overlapping thermoplastic strapping tape is combined by the heat generated by friction movement, so it is called "friction welding". The compressed air presses down the piston of the cylinder. The piston and the upper part of the vibrator are connected with the positioning pin. The vibrator presses the overlapping part of the strapping tape.
An elliptical hole is built in the vibrator of the pneumatic baler, which is connected to the eccentric shaft of the pneumatic motor. The pneumatic motor rotates at high speed, which makes the vibrator move back and forth quickly.
The pneumatic baler fixes the lower part of the strapping tape by the triangular teeth of the bottom mold, and the upper part is driven by the triangular teeth of the vibrator, which causes intense friction. In this way, the overlapping part of the strapping tape is overheated and welded. When the vibration timer reaches the set time, the welding is completed.
The pneumatic baler makes the upper and lower parts of the PET strapping tape stick while squeezing and standing for a few seconds to ensure that the weld has cooled. It is simple to operate and easy to use.
1. Use air source for operation, durable and easy to maintain.
2. Combined type. Pneumatic tightening, snap-on and tape cutting are integrated.
3. Double snap-on type, easy to operate.
4. Good stability and long service life.
5. Applicable industries: round or irregular flat packaging such as steel, aluminum, electronics, auto parts, building materials, etc.
6. Operation mode: full pneumatic push-on type.
| Name | Pneumatic strapping machine |
| Color | Alloy Gray |
| Applicable strapping tape | PET polyester strap |
| Packing method | Friction hot melt |
| Strap width | 13-25mm |
| Strap thickness | 0.5-1.5 mm |
| Maximum tension | 35000N |
| Air pressure | 0.5*0.8mpa |
| Welding time | 1-5S (adjustable) |
| Dimensions | L280*H150*W175mm |
| Weight | 3.8KG |
PET plastic steel belt pneumatic baler: a pneumatic baler specially designed for PET plastic steel belt, with two joining methods:
a. Using steel buckles for biting, the biting methods are single biting buckle and double biting buckle;
b. Directly join by biting without using steel buckles.
What materials are used for pneumatic strapping machines?
Pneumatic strapping machines are suitable for PP PET strapping tapes.
What is the joining method of pneumatic strapping machines?
The joining method of pneumatic strapping machines is hot melt bonding.
Where is the pneumatic strapping machine produced?
Shenzhen
What is the minimum order quantity for pneumatic strapping machines?
1PCS
What is the trading method for pneumatic strapping machines?
TT LC Made in China Network, etc.
